* Janusz Krzysztofik [off-list ref] [111219 16:46]:

On Tuesday 20 of December 2011 at 02:04:46, Tony Lindgren wrote:

quoted

* Janusz Krzysztofik [off-list ref] [111219 16:28]:

quoted

On Tuesday 20 of December 2011 at 01:06:00, Tony Lindgren wrote:

quoted

This part especially looks like it really should be just a regular
device driver under drivers/ somewhere. 

I really don't understand what kind of a driver you might mean here.

The latch_gpios[] table is initially filled with all latch1 and latch2 
GPIO pins in order to register and initialize them from the board file 
until they are handled by respective existing device drivers (leds, 
nand, lcd, serio, serial8250, asoc) instead of those drivers accessing 
the latches with those old ams_delta_latch[12]_write() functions. That 
table will get almost empty after the transision process is completed, 
holding only pins not used by any drivers / connected to unsued devices, 
in order to initialize them from the board file for power saving 
purposes. A separate driver for the purpose of initializing a few GPIO 
pins seems an overkill.

OK maybe update the comments a bit to describe how that table will
mostly disappear? It's not obvious from glancing over this patch
series :)

To be sure, do you mean in-line comments? Or the changelog message?

Just the changelog.

Tony