[PATCH v9 0/3] Add support for tegra2 based ventana board
From: pdeschrijver@nvidia.com (pdeschrijver at nvidia.com)
Date: 2011-10-12 11:53:35
Also in:
linux-tegra, lkml
From: Peter De Schrijver <pdeschrijver@nvidia.com> This patch set adds support for the tegra2 based ventana development board. Boot tested on ventana. Uses a table based approach to select the correct init function. Provoke kernel warning when no suitable pinmux table can be found. Peter De Schrijver (3): arm/tegra: prepare Seaboard pinmux code for derived boards arm/tegra: add support for ventana pinmuxing arm/tegra: device tree support for ventana board arch/arm/boot/dts/tegra-ventana.dts | 32 ++++++++++++++ arch/arm/mach-tegra/Kconfig | 6 +++ arch/arm/mach-tegra/Makefile | 1 + arch/arm/mach-tegra/Makefile.boot | 1 + arch/arm/mach-tegra/board-dt.c | 5 ++- arch/arm/mach-tegra/board-seaboard-pinmux.c | 63 ++++++++++++++++++++++++--- 6 files changed, 101 insertions(+), 7 deletions(-) create mode 100644 arch/arm/boot/dts/tegra-ventana.dts