Thread (8 messages) 8 messages, 4 authors, 2011-09-28
STALE5366d
Revisions (11)
  1. v1 [diff vs current]
  2. v2 [diff vs current]
  3. v3 [diff vs current]
  4. v3 [diff vs current]
  5. v4 current
  6. v5 [diff vs current]
  7. v6 [diff vs current]
  8. v7 [diff vs current]
  9. v7 [diff vs current]
  10. v8 [diff vs current]
  11. v9 [diff vs current]

[PATCH v4 0/3] Add support for tegra2 based ventana board

From: pdeschrijver@nvidia.com (Peter De Schrijver)
Date: 2011-09-28 01:05:23
Also in: linux-tegra, lkml 

This patch set adds support for the tegra2 based ventana development board.

Boot tested on ventana.                                                                                                                               

Now finally without Change-IDs I hope...

Peter De Schrijver (3):
  arm/tegra: prepare Seaboard pinmux code for derived boards
  arm/tegra: add support for ventana pinmuxing
  arm/tegra: device tree support for ventana board

 arch/arm/boot/dts/tegra-ventana.dts         |   32 ++++++++++++++
 arch/arm/mach-tegra/Kconfig                 |    6 +++
 arch/arm/mach-tegra/Makefile                |    1 +
 arch/arm/mach-tegra/Makefile.boot           |    1 +
 arch/arm/mach-tegra/board-dt.c              |    5 ++-
 arch/arm/mach-tegra/board-seaboard-pinmux.c |   63 ++++++++++++++++++++++++---
 6 files changed, 101 insertions(+), 7 deletions(-)
 create mode 100644 arch/arm/boot/dts/tegra-ventana.dts
Keyboard shortcuts
hback out one level
jnext message in thread
kprevious message in thread
ldrill in
Escclose help / fold thread tree
?toggle this help