[PATCH v5 04/22] gpio/omap: fix pwrdm_post_transition call sequence
From: Tarun Kanti DebBarma <hidden>
Date: 2011-08-04 11:04:35
Also in:
linux-omap
Subsystem:
arm port, omap power management support, omap2+ support, the rest · Maintainers:
Russell King, Kevin Hilman, Aaro Koskinen, Andreas Kemnade, Roger Quadros, Tony Lindgren, Linus Torvalds
From: Charulatha V <redacted> The context lost count is modified in omap_sram_idle() path when pwrdm_post_transition() is called. But pwrdm_post_transition() is called only after omap_gpio_resume_after_idle() is called. Correct this so that context lost count is modified before calling omap_gpio_resume_after_idle(). This would be useful when OMAP GPIO save/restore context is called by the OMAP GPIO driver itself. Signed-off-by: Charulatha V <redacted> --- arch/arm/mach-omap2/pm34xx.c | 7 ++++--- 1 files changed, 4 insertions(+), 3 deletions(-)
diff --git a/arch/arm/mach-omap2/pm34xx.c b/arch/arm/mach-omap2/pm34xx.c
index c155c9d..51d5a5c 100644
--- a/arch/arm/mach-omap2/pm34xx.c
+++ b/arch/arm/mach-omap2/pm34xx.c@@ -375,7 +375,6 @@ void omap_sram_idle(void) printk(KERN_ERR "Invalid mpu state in sram_idle\n"); return; } - pwrdm_pre_transition(); /* NEON control */ if (pwrdm_read_pwrst(neon_pwrdm) == PWRDM_POWER_ON)
@@ -398,6 +397,8 @@ void omap_sram_idle(void) if (!console_trylock()) goto console_still_active; + pwrdm_pre_transition(); + /* PER */ if (per_next_state < PWRDM_POWER_ON) { per_going_off = (per_next_state == PWRDM_POWER_OFF) ? 1 : 0;
@@ -467,6 +468,8 @@ void omap_sram_idle(void) } omap3_intc_resume_idle(); + pwrdm_post_transition(); + /* PER */ if (per_next_state < PWRDM_POWER_ON) { per_prev_state = pwrdm_read_prev_pwrst(per_pwrdm);
@@ -490,8 +493,6 @@ console_still_active: omap3_disable_io_chain(); } - pwrdm_post_transition(); - clkdm_allow_idle(mpu_pwrdm->pwrdm_clkdms[0]); }
--
1.7.0.4