[PATCH 1/1] AT91: flexibity: default leds to heartbeat
From: Maxim Osipov <hidden>
Date: 2011-05-30 17:14:18
Also in:
lkml
Subsystem:
arm port, arm/microchip (at91) soc support, the rest · Maintainers:
Russell King, Nicolas Ferre, Alexandre Belloni, Claudiu Beznea, Linus Torvalds
This patch changes default behavior of Flexibity board LEDs to blinking for boot diagnostic purpose. Signed-off-by: Maxim Osipov <redacted> --- arch/arm/mach-at91/board-flexibity.c | 16 ++++++++-------- 1 files changed, 8 insertions(+), 8 deletions(-)
diff --git a/arch/arm/mach-at91/board-flexibity.c b/arch/arm/mach-at91/board-flexibity.c
index 4fdc96c..8cbec8a 100644
--- a/arch/arm/mach-at91/board-flexibity.c
+++ b/arch/arm/mach-at91/board-flexibity.c@@ -96,49 +96,49 @@ static struct gpio_led flexibity_leds[] = { .name = "usb1:green", .gpio = AT91_PIN_PA12, .active_low = 1, - .default_trigger = "default-on", + .default_trigger = "heartbeat", }, { .name = "usb1:red", .gpio = AT91_PIN_PA13, .active_low = 1, - .default_trigger = "default-on", + .default_trigger = "heartbeat", }, { .name = "usb2:green", .gpio = AT91_PIN_PB26, .active_low = 1, - .default_trigger = "default-on", + .default_trigger = "heartbeat", }, { .name = "usb2:red", .gpio = AT91_PIN_PB27, .active_low = 1, - .default_trigger = "default-on", + .default_trigger = "heartbeat", }, { .name = "usb3:green", .gpio = AT91_PIN_PC8, .active_low = 1, - .default_trigger = "default-on", + .default_trigger = "heartbeat", }, { .name = "usb3:red", .gpio = AT91_PIN_PC6, .active_low = 1, - .default_trigger = "default-on", + .default_trigger = "heartbeat", }, { .name = "usb4:green", .gpio = AT91_PIN_PB4, .active_low = 1, - .default_trigger = "default-on", + .default_trigger = "heartbeat", }, { .name = "usb4:red", .gpio = AT91_PIN_PB5, .active_low = 1, - .default_trigger = "default-on", + .default_trigger = "heartbeat", } };
--
1.7.4.1