[PATCH 1/1] AT91: flexibity: default leds to heartbeat

Subsystems: arm port, arm/microchip (at91) soc support, the rest

STALE5579d

2 messages, 2 authors, 2011-05-31 · open the first message on its own page

[PATCH 1/1] AT91: flexibity: default leds to heartbeat

From: Maxim Osipov <hidden>
Date: 2011-05-30 17:14:18 

This patch changes default behavior of Flexibity board LEDs to blinking
for boot diagnostic purpose.

Signed-off-by: Maxim Osipov <redacted>
---
 arch/arm/mach-at91/board-flexibity.c |   16 ++++++++--------
 1 files changed, 8 insertions(+), 8 deletions(-)

diff --git a/arch/arm/mach-at91/board-flexibity.c b/arch/arm/mach-at91/board-flexibity.c
index 4fdc96c..8cbec8a 100644
--- a/arch/arm/mach-at91/board-flexibity.c
+++ b/arch/arm/mach-at91/board-flexibity.c
@@ -96,49 +96,49 @@ static struct gpio_led flexibity_leds[] = {
 		.name			= "usb1:green",
 		.gpio			= AT91_PIN_PA12,
 		.active_low		= 1,
-		.default_trigger	= "default-on",
+		.default_trigger	= "heartbeat",
 	},
 	{
 		.name			= "usb1:red",
 		.gpio			= AT91_PIN_PA13,
 		.active_low		= 1,
-		.default_trigger	= "default-on",
+		.default_trigger	= "heartbeat",
 	},
 	{
 		.name			= "usb2:green",
 		.gpio			= AT91_PIN_PB26,
 		.active_low		= 1,
-		.default_trigger	= "default-on",
+		.default_trigger	= "heartbeat",
 	},
 	{
 		.name			= "usb2:red",
 		.gpio			= AT91_PIN_PB27,
 		.active_low		= 1,
-		.default_trigger	= "default-on",
+		.default_trigger	= "heartbeat",
 	},
 	{
 		.name			= "usb3:green",
 		.gpio			= AT91_PIN_PC8,
 		.active_low		= 1,
-		.default_trigger	= "default-on",
+		.default_trigger	= "heartbeat",
 	},
 	{
 		.name			= "usb3:red",
 		.gpio			= AT91_PIN_PC6,
 		.active_low		= 1,
-		.default_trigger	= "default-on",
+		.default_trigger	= "heartbeat",
 	},
 	{
 		.name			= "usb4:green",
 		.gpio			= AT91_PIN_PB4,
 		.active_low		= 1,
-		.default_trigger	= "default-on",
+		.default_trigger	= "heartbeat",
 	},
 	{
 		.name			= "usb4:red",
 		.gpio			= AT91_PIN_PB5,
 		.active_low		= 1,
-		.default_trigger	= "default-on",
+		.default_trigger	= "heartbeat",
 	}
 };
 
-- 
1.7.4.1

Re: [PATCH 1/1] AT91: flexibity: default leds to heartbeat

From: Jean-Christophe PLAGNIOL-VILLARD <hidden>
Date: 2011-05-31 10:27:14 

On 18:13 Mon 30 May     , Maxim Osipov wrote:
quoted hunk
This patch changes default behavior of Flexibity board LEDs to blinking
for boot diagnostic purpose.

Signed-off-by: Maxim Osipov <redacted>
---
 arch/arm/mach-at91/board-flexibity.c |   16 ++++++++--------
 1 files changed, 8 insertions(+), 8 deletions(-)

diff --git a/arch/arm/mach-at91/board-flexibity.c b/arch/arm/mach-at91/board-flexibity.c
index 4fdc96c..8cbec8a 100644
--- a/arch/arm/mach-at91/board-flexibity.c
+++ b/arch/arm/mach-at91/board-flexibity.c
@@ -96,49 +96,49 @@ static struct gpio_led flexibity_leds[] = {
 		.name			= "usb1:green",
 		.gpio			= AT91_PIN_PA12,
 		.active_low		= 1,
-		.default_trigger	= "default-on",
+		.default_trigger	= "heartbeat",
can we factorize this a few
they have all the same default_trigger and active low

Best Regards,
J.
Keyboard shortcuts
hback out one level
jnext message in thread
kprevious message in thread
ldrill in
Escclose help / fold thread tree
?toggle this help