[PATCH 08/10] ARM: mxs: add ocotp read function

@@ -1,5 +1,5 @@
 # Common support
-obj-y := clock.o devices.o gpio.o icoll.o iomux.o system.o timer.o
+obj-y := clock.o devices.o gpio.o icoll.o iomux.o ocotp.o system.o timer.o
 
 obj-$(CONFIG_SOC_IMX23) += clock-mx23.o mm-mx23.o
 obj-$(CONFIG_SOC_IMX28) += clock-mx28.o mm-mx28.o

@@ -13,6 +13,7 @@
 
 struct clk;
 
+extern int mxs_read_ocotp(int offset, int count, u32 *values);
 extern int mxs_reset_block(void __iomem *);
 extern void mxs_timer_init(struct clk *, int);
 

@@ -0,0 +1,52 @@
+/*
+ * Copyright 2010 Freescale Semiconductor, Inc. All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/delay.h>
+#include <linux/err.h>
+
+#include <mach/mxs.h>
+
+#define BM_OCOTP_CTRL_RD_BANK_OPEN	(1 << 12)
+#define BM_OCOTP_CTRL_BUSY		(1 << 8)
+
+int mxs_read_ocotp(int offset, int count, u32 *values)
+{
+	void __iomem *ocotp_base = MXS_IO_ADDRESS(MXS_OCOTP_BASE_ADDR);
+	int i, timeout = 0x400;
+
+	/* open OCOTP banks for read */
+	__mxs_setl(BM_OCOTP_CTRL_RD_BANK_OPEN, ocotp_base);
+
+	/* approximately wait 32 hclk cycles */
+	udelay(1);
+
+	/* poll BUSY bit becoming cleared */
+	while ((__raw_readl(ocotp_base) & BM_OCOTP_CTRL_BUSY) && --timeout)
+		/* nothing */;
+
+	if (unlikely(!timeout))
+		goto error;
+
+	for (i = 0; i < count; i++, offset += 4)
+		*values++ = __raw_readl(ocotp_base + offset);
+
+	/* close banks for power saving */
+	__mxs_clrl(BM_OCOTP_CTRL_RD_BANK_OPEN, ocotp_base);
+
+	return 0;
+
+error:
+	pr_err("%s: timeout in reading OCOTP\n", __func__);
+	return -ETIMEDOUT;
+}