[PATCH v4 16/52] mtd: nand: use mtd_set_ecclayout() where appropriate
STALE3860d
From: Boris Brezillon <hidden>
Date: 2016-03-07 10:01:47
Also in:
linux-arm-kernel, linux-mips, linux-samsung-soc, lkml
Subsystem:
memory technology devices (mtd), nand flash subsystem, the rest · Maintainers:
Miquel Raynal, Richard Weinberger, Vignesh Raghavendra, Linus Torvalds
Revision v4 of 5 in this series.
Revisions (5)
Use the mtd_set_ecclayout() helper instead of directly assigning the mtd->ecclayout field. Signed-off-by: Boris Brezillon <boris.brezillon-wi1+55ScJUtKEb57/3fJTNBPR1lH4CV8@public.gmane.org> --- drivers/mtd/nand/nand_base.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/mtd/nand/nand_base.c b/drivers/mtd/nand/nand_base.c
index 39696f7..1e36a02 100644
--- a/drivers/mtd/nand/nand_base.c
+++ b/drivers/mtd/nand/nand_base.c@@ -4288,7 +4288,7 @@ int nand_scan_tail(struct mtd_info *mtd) ecc->write_oob_raw = ecc->write_oob; /* propagate ecc info to mtd_info */ - mtd->ecclayout = ecc->layout; + mtd_set_ecclayout(mtd, ecc->layout); mtd->ecc_strength = ecc->strength; mtd->ecc_step_size = ecc->size;
--
2.1.4