[PATCH v4 18/52] mtd: docg3: use mtd_set_ecclayout() where appropriate
flat view
STALE3867d
SUPERSEDED: 4 (4M)
From: Boris Brezillon <hidden>
Date: 2016-03-07 10:01:31
Also in:
linux-arm-kernel, linux-mips, linux-samsung-soc, lkml
Subsystem:
memory technology devices (mtd), msystems diskonchip g3 mtd driver, the rest · Maintainers:
Miquel Raynal, Richard Weinberger, Vignesh Raghavendra, Robert Jarzmik, Linus Torvalds
Revision v4 of 5 in this series; 1 review trailer (1 from subsystem maintainers).
Revisions (5)
Use the mtd_set_ecclayout() helper instead of directly assigning the mtd->ecclayout field. Signed-off-by: Boris Brezillon <boris.brezillon-wi1+55ScJUtKEb57/3fJTNBPR1lH4CV8@public.gmane.org> Acked-by: Robert Jarzmik <redacted> --- drivers/mtd/devices/docg3.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/mtd/devices/docg3.c b/drivers/mtd/devices/docg3.c
index e7b2e43..6b516e1 100644
--- a/drivers/mtd/devices/docg3.c
+++ b/drivers/mtd/devices/docg3.c@@ -1857,7 +1857,7 @@ static int __init doc_set_driver_info(int chip_id, struct mtd_info *mtd) mtd->_read_oob = doc_read_oob; mtd->_write_oob = doc_write_oob; mtd->_block_isbad = doc_block_isbad; - mtd->ecclayout = &docg3_oobinfo; + mtd_set_ecclayout(mtd, &docg3_oobinfo); mtd->oobavail = 8; mtd->ecc_strength = DOC_ECC_BCH_T;
--
2.1.4