On Fri, Feb 19, 2016 at 11:45 AM, Vladimir Murzin
[off-list ref] wrote:

On 16/02/16 13:09, Vladimir Murzin wrote:

quoted

quoted

quoted

+EARLYCON_DECLARE(mps2, mps2_early_console_setup);

quoted

quoted

+OF_EARLYCON_DECLARE(mps2, "arm,mps2-uart", mps2_early_console_setup);

IIRC Peter Hurley mentioned you don't need to put both anymore, OF_
one is enough.

I've just tried with OF_ only and seems it works fine. Thanks for
pointing at it!

..and the reason for that was that I had stdout pointing at uart node.
Now, while testing v4 I end-up with configuration:

1) no EARLYCON_DECLARE in mps2-uart.c
2) stdout not set
3) cmdline has "earlycon=mps2,0x40004000 console=/dev/ttyMPS"

and I don't see bootconsole, but if I avoid 1) everything works fine.
So, I'd leave EARLYCON_DECLARE in this patch.

Peter, what is your comment on this?


-- 
With Best Regards,
Andy Shevchenko
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html