@Thomas, @Ferruh, I tend to accept it (with minor style fixes),
but I need your opinion on it before doing it.

Thanks,
Andrew.

On 6/29/21 5:27 AM, Huisong Li wrote:

在 2021/6/14 23:37, Andrew Rybchenko 写道:

quoted

Summary should start from "ethdev: "

Don't forget to include all maintainers in Cc the next time.
Just use --cc-cmd or --to-cmd options.

ok, thanks!

quoted

Adding Thomas.

On 5/8/21 11:00 AM, Huisong Li wrote:

quoted

Currently, if dev_configure is not invoked or fails to be invoked, users
can still invoke dev_start successfully. This patch adds a
"dev_configured"
flag in "rte_eth_dev_data" to control whether dev_start can be invoked.

In theory there is an indirect condition. If number of configured Tx
*and* Rx queues is 0, device is not configured.

That's true. If the framework doesn't have this check, each driver needs
to do this.

But it's a common thing, and it's probably more reasonable to put it in
the ethdev layer.

quoted

I have no strong opinion on the topic. Extra flag requires
extra housekeeping. Indirect conditions are not always good
and could be a subject to change.

quoted

Signed-off-by: Huisong Li <lihuisong@huawei.com>
---
  lib/ethdev/rte_ethdev.c      | 11 +++++++++++
  lib/ethdev/rte_ethdev_core.h |  6 +++++-
  2 files changed, 16 insertions(+), 1 deletion(-)

diff --git a/lib/ethdev/rte_ethdev.c b/lib/ethdev/rte_ethdev.c
index a187976..7d74b17 100644
--- a/lib/ethdev/rte_ethdev.c
+++ b/lib/ethdev/rte_ethdev.c

@@ -1604,6 +1604,8 @@ rte_eth_dev_configure(uint16_t port_id,

uint16_t nb_rx_q, uint16_t nb_tx_q,
      }
        rte_ethdev_trace_configure(port_id, nb_rx_q, nb_tx_q,
dev_conf, 0);
+    dev->data->dev_configured = 1;
+
      return 0;
  reset_queues:
      eth_dev_rx_queue_config(dev, 0);

@@ -1614,6 +1616,8 @@ rte_eth_dev_configure(uint16_t port_id,

uint16_t nb_rx_q, uint16_t nb_tx_q,
          dev->data->mtu = old_mtu;
        rte_ethdev_trace_configure(port_id, nb_rx_q, nb_tx_q,
dev_conf, ret);
+    dev->data->dev_configured = 0;
+
      return ret;
  }
  @@ -1749,6 +1753,13 @@ rte_eth_dev_start(uint16_t port_id)
        RTE_FUNC_PTR_OR_ERR_RET(*dev->dev_ops->dev_start, -ENOTSUP);
  +    if (dev->data->dev_configured == 0) {
+        RTE_ETHDEV_LOG(INFO,
+            "Device with port_id=%"PRIu16" is not configured.\n",
+            port_id);
+        return -EINVAL;
+    }
+
      if (dev->data->dev_started != 0) {
          RTE_ETHDEV_LOG(INFO,
              "Device with port_id=%"PRIu16" already started\n",

diff --git a/lib/ethdev/rte_ethdev_core.h b/lib/ethdev/rte_ethdev_core.h
index 4679d94..b508769 100644
--- a/lib/ethdev/rte_ethdev_core.h
+++ b/lib/ethdev/rte_ethdev_core.h

@@ -167,7 +167,11 @@ struct rte_eth_dev_data {

          scattered_rx : 1,  /**< RX of scattered packets is ON(1) /
OFF(0) */
          all_multicast : 1, /**< RX all multicast mode ON(1) /
OFF(0). */
          dev_started : 1,   /**< Device state: STARTED(1) /
STOPPED(0). */
-        lro         : 1;   /**< RX LRO is ON(1) / OFF(0) */
+        lro         : 1,  /**< RX LRO is ON(1) / OFF(0) */
+        dev_configured : 1;
+        /**< Device configuration state:
+         * CONFIGURED(1) / NOT CONFIGURED(0).
+         */
      uint8_t rx_queue_state[RTE_MAX_QUEUES_PER_PORT];
          /**< Queues state: HAIRPIN(2) / STARTED(1) / STOPPED(0). */
      uint8_t tx_queue_state[RTE_MAX_QUEUES_PER_PORT];

.