[dpdk-dev] [PATCH 03/21] net/ixgbe/base: hange flow for "Apply Update" command
From: Guinan Sun <hidden>
Date: 2020-06-12 03:46:30
Subsystem:
networking drivers, the rest · Maintainers:
Andrew Lunn, "David S. Miller", Eric Dumazet, Jakub Kicinski, Paolo Abeni, Linus Torvalds
For the "Apply Update" command the firmware does not given an response. For this command, success should be return. Based on information at EAS. Signed-off-by: Mateusz Kowalski <redacted> Signed-off-by: Guinan Sun <redacted> --- drivers/net/ixgbe/base/ixgbe_common.c | 9 ++++++++- drivers/net/ixgbe/base/ixgbe_type.h | 12 ++++++++++++ 2 files changed, 20 insertions(+), 1 deletion(-)
diff --git a/drivers/net/ixgbe/base/ixgbe_common.c b/drivers/net/ixgbe/base/ixgbe_common.c
index 9e3b71e38..89ae2b462 100644
--- a/drivers/net/ixgbe/base/ixgbe_common.c
+++ b/drivers/net/ixgbe/base/ixgbe_common.c@@ -4584,11 +4584,18 @@ s32 ixgbe_hic_unlocked(struct ixgbe_hw *hw, u32 *buffer, u32 length, msec_delay(1); } + /* For each command except "Apply Update" perform + * status checks in the HICR registry. + */ + if ((buffer[0] & IXGBE_HOST_INTERFACE_MASK_CMD) == + IXGBE_HOST_INTERFACE_APPLY_UPDATE_CMD) + return IXGBE_SUCCESS; + /* Check command completion */ if ((timeout && i == timeout) || !(IXGBE_READ_REG(hw, IXGBE_HICR) & IXGBE_HICR_SV)) { ERROR_REPORT1(IXGBE_ERROR_CAUTION, - "Command has failed with no status valid.\n"); + "Command has failed with no status valid.\n"); return IXGBE_ERR_HOST_INTERFACE_COMMAND; }
diff --git a/drivers/net/ixgbe/base/ixgbe_type.h b/drivers/net/ixgbe/base/ixgbe_type.h
index 0470b1dfc..33ca659cd 100644
--- a/drivers/net/ixgbe/base/ixgbe_type.h
+++ b/drivers/net/ixgbe/base/ixgbe_type.h@@ -4366,4 +4366,16 @@ struct ixgbe_hw { #define IXGBE_NW_MNG_IF_SEL_MDIO_PHY_ADD \ (0x1F << IXGBE_NW_MNG_IF_SEL_MDIO_PHY_ADD_SHIFT) +/* Code Command (Flash I/F Interface) */ +#define IXGBE_HOST_INTERFACE_FLASH_READ_CMD 0x30 +#define IXGBE_HOST_INTERFACE_SHADOW_RAM_READ_CMD 0x31 +#define IXGBE_HOST_INTERFACE_FLASH_WRITE_CMD 0x32 +#define IXGBE_HOST_INTERFACE_SHADOW_RAM_WRITE_CMD 0x33 +#define IXGBE_HOST_INTERFACE_FLASH_MODULE_UPDATE_CMD 0x34 +#define IXGBE_HOST_INTERFACE_FLASH_BLOCK_EREASE_CMD 0x35 +#define IXGBE_HOST_INTERFACE_SHADOW_RAM_DUMP_CMD 0x36 +#define IXGBE_HOST_INTERFACE_FLASH_INFO_CMD 0x37 +#define IXGBE_HOST_INTERFACE_APPLY_UPDATE_CMD 0x38 +#define IXGBE_HOST_INTERFACE_MASK_CMD 0x000000FF + #endif /* _IXGBE_TYPE_H_ */
--
2.17.1