[PATCH 1/2] net/mlx5: replace memory barrier type

From: Shahaf Shuler <redacted>

The reason for the requirement of a barrier between the txq writes
and the doorbell record writes is to avoid a case where the device
reads the doorbell record's new value before the txq writes are flushed
to memory.

The current use of rte_wmb is not necessary, and can be replaced by
rte_compiler_barrier as it acts as a write memory barrier.
More details on this type of barrier can be found on [1]

Replacing the rte_wmb is also expected to improve the throughput.

[1] https://gcc.gnu.org/onlinedocs/gcc/Extended-Asm.html

Signed-off-by: Shahaf Shuler <redacted>
Signed-off-by: Yongseok Koh <redacted>
Signed-off-by: Alexander Solganik <redacted>
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
---
 drivers/net/mlx5/mlx5_rxtx.h | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/net/mlx5/mlx5_rxtx.h b/drivers/net/mlx5/mlx5_rxtx.h
index 7de1d10863e5..59b9ff24fb82 100644
--- a/drivers/net/mlx5/mlx5_rxtx.h
+++ b/drivers/net/mlx5/mlx5_rxtx.h

@@ -602,7 +602,7 @@ mlx5_tx_dbrec(struct txq *txq, volatile struct mlx5_wqe *wqe)
 	uint64_t *dst = (uint64_t *)((uintptr_t)txq->bf_reg);
 	volatile uint64_t *src = ((volatile uint64_t *)wqe);
 
-	rte_wmb();
+	rte_compiler_barrier();
 	*txq->qp_db = htonl(txq->wqe_ci);
 	/* Ensure ordering between DB record and BF copy. */
 	rte_wmb();

-- 
2.7.4