Hi,

We reached a consensus on configuring FTAG by devargs method, any other suggestion
or concern for this patch?

Best Regards,
Xiao

-----Original Message-----
From: Liu, Yong
Sent: Tuesday, March 8, 2016 3:58 PM
To: Wang, Xiao W <redacted>; Chen, Jing D
[off-list ref]
Cc: dev@dpdk.org
Subject: RE: [dpdk-dev] [PATCH v5 0/2] fm10k: enable FTAG based forwarding

Tested-by: Yong Liu <redacted>

- Tested Branch: dpdk-next-net/rel_16_04
- Tested Commit: 4ac366ba647909c3b71818f9be9db86ba5e871da
- OS: Fedora20 3.11.10-301.fc20.x86_64
- GCC: gcc version 4.8.3 20140911
- CPU: Intel(R) Xeon(R) CPU E5-2699 v3 @ 2.30GHz
- NIC: Intel Corporation Device RedrockCanyou [8086:15a4]
- Default x86_64-native-linuxapp-gcc configuration
- Prerequisites:
- Total 1 cases, 1 passed, 0 failed

- Prerequisites command / instruction:
  Apply fm_ftag unit test patch.
  export Port0 and Port1's GLORT ID to environment variables
    export PORT1_GLORT=0x4200
    export PORT0_GLORT=0x4000

- Case: Ftag forwarding unit test
  Description: check fm10k nic can forwarding packets based on FTAG
  Command / instruction:
    Start test application and run fm10k_ftag_autotest
      test -c f -n 4 -w 83:00.0,enable_ftag=1 -w 85:00.0,enable_ftag=1
      RTE>>fm10k_ftag_autotest
    Send packet to Port0 and verify packet forwarded to Port1
      Receive 1 packets on port 0
      test for FTAG RX passed
      Send out 1 packets with FTAG on port 0
      Receive 1 packets on port 1
      test for FTAG TX passed
      Test OK

quoted

-----Original Message-----
From: dev [mailto:dev-bounces@dpdk.org] On Behalf Of Wang Xiao W
Sent: Wednesday, March 02, 2016 7:19 PM
To: Chen, Jing D
Cc: dev@dpdk.org
Subject: [dpdk-dev] [PATCH v5 0/2] fm10k: enable FTAG based forwarding

v5:
* Used kvargs api to parse the devargs parameter.
* Put release note into the driver patch.

v4:
* Removed the build time config option, used devargs to config FTAG.
* Rebased on head of dpdk-next-net/rel_16_04 branch.

v3:
* Removed "\n" in PMD_INIT_LOG.
* Returned "-ENOTSUP" instead of -1 in VF FTAG use case.

v2:
* Gave an error message for VF FTAG use case.
* Added a notice in the doc to emphasize that application should ensure
  an appropriate FTAG for every frame in FTAG based forwarding mode.

Wang Xiao W (2):
  fm10k: enable FTAG based forwarding
  doc: add introduction for fm10k FTAG based forwarding

 doc/guides/nics/fm10k.rst              | 16 ++++++++-
 doc/guides/rel_notes/release_16_04.rst |  2 ++
 drivers/net/fm10k/fm10k.h              |  2 ++
 drivers/net/fm10k/fm10k_ethdev.c       | 65
+++++++++++++++++++++++++++++++++-
 drivers/net/fm10k/fm10k_rxtx.c         | 15 ++++++++
 drivers/net/fm10k/fm10k_rxtx_vec.c     |  3 ++
 6 files changed, 101 insertions(+), 2 deletions(-)

--
1.9.3