On 15-10-19, 07:05, Ardelean, Alexandru wrote:

On Mon, 2019-10-14 at 12:31 +0530, Vinod Koul wrote:

quoted

[External]

Hey,

quoted

On 13-09-19, 17:54, Alexandru Ardelean wrote:

quoted

From: Rodrigo Alencar <redacted>

dmaengine_slave_config is called by dmaengine_pcm_hw_params when using
axi-i2s with axi-dmac. If device_config is NULL, -ENOSYS  is returned,
which breaks the snd_pcm_hw_params function.
This is a fix for the error:

and what is that?

quoted

$ aplay -D plughw:ADAU1761 /usr/share/sounds/alsa/Front_Center.wav
Playing WAVE '/usr/share/sounds/alsa/Front_Center.wav' : Signed 16 bit
Little Endian, Rate 48000 Hz, Mono
axi-i2s 43c20000.axi-i2s: ASoC: 43c20000.axi-i2s hw params failed: -38

Error is above this line [code -38].

Right and it would help explaining a bit more on the error!

quoted

quoted

aplay: set_params:1403: Unable to install hw params:
ACCESS:  RW_INTERLEAVED
FORMAT:  S16_LE
SUBFORMAT:  STD
SAMPLE_BITS: 16
FRAME_BITS: 16
CHANNELS: 1
RATE: 48000
PERIOD_TIME: 125000
PERIOD_SIZE: 6000
PERIOD_BYTES: 12000
PERIODS: 4
BUFFER_TIME: 500000
BUFFER_SIZE: 24000
BUFFER_BYTES: 48000
TICK_TIME: 0

Signed-off-by: Rodrigo Alencar <redacted>
Signed-off-by: Alexandru Ardelean <redacted>
---

Note: Fixes tag not added intentionally.

 drivers/dma/dma-axi-dmac.c | 16 ++++++++++++++++
 1 file changed, 16 insertions(+)

diff --git a/drivers/dma/dma-axi-dmac.c b/drivers/dma/dma-axi-dmac.c
index a0ee404b736e..ab2677343202 100644
--- a/drivers/dma/dma-axi-dmac.c
+++ b/drivers/dma/dma-axi-dmac.c

@@ -564,6 +564,21 @@ static struct dma_async_tx_descriptor

*axi_dmac_prep_slave_sg(
 	return vchan_tx_prep(&chan->vchan, &desc->vdesc, flags);
 }
 
+static int axi_dmac_device_config(struct dma_chan *c,
+			struct dma_slave_config *slave_config)
+{
+	struct axi_dmac_chan *chan = to_axi_dmac_chan(c);
+	struct axi_dmac *dmac = chan_to_axi_dmac(chan);
+
+	/* no configuration required, a sanity check is done instead */
+	if (slave_config->direction != chan->direction) {

 slave_config->direction is a deprecated field, pls dont use that

ack
any alternative recommendations of what to do in this case?
i can take a look, but if you have something on-the-top-of-your-head, i'm
open to suggestions
we can also just drop this completely and let userspace fail

Yeah it is tricky, this should be ideally implemented properly.

quoted

quoted

+		dev_err(dmac->dma_dev.dev, "Direction not supported by this
DMA Channel");
+		return -EINVAL;

So you intent to support slave dma but do not use dma_slave_config.. how
are you getting the slave address and other details?

This DMA controller is a bit special.
It gets synthesized in FPGA, so the configuration is fixed and cannot be
changed at runtime. Maybe later we would allow/implement this
functionality, but this is a question for my HDL colleagues.

Two things are done (in this order):
1. For some paramters, axi_dmac_parse_chan_dt() is used to determine things
from device-tree; as it's an FPGA core, things are synthesized once and
cannot change (yet)
2. For other parameters, the axi_dmac_detect_caps() is used to guess some
of them at probe time, by doing some reg reads/writes

So the question for you hw folks is how would a controller work with
multiple slave devices, do they need to synthesize it everytime?

Rather than that why cant they make the peripheral addresses
programmable so that you dont need updating fpga everytime!

I'll admit that maybe the whole approach could be done a bit
differently/better. But I guess this approach was chosen by the fact that
it's FPGA.

Well FPGA doesnt mean hw should know everything, having SW program
things is not a terrible idea

-- 
~Vinod