[2/7] dmaengine: stm32-dma: fix incomplete configuration in cyclic mode
From: Joel Fernandes <hidden>
Date: 2018-10-09 05:48:11
Also in:
linux-arm-kernel, lkml, stable
Subsystem:
dma generic offload engine subsystem, the rest · Maintainers:
Vinod Koul, Linus Torvalds
From: Pierre Yves MORDRET <redacted> When in cyclic mode, the configuration is updated after having started the DMA hardware (STM32_DMA_SCR_EN) leading to incomplete configuration of SMxAR registers. Signed-off-by: Pierre-Yves MORDRET <redacted> Signed-off-by: Hugues Fruchet <redacted> Signed-off-by: Vinod Koul <redacted> --- drivers/dma/stm32-dma.c | 8 ++++++-- 1 file changed, 6 insertions(+), 2 deletions(-)
diff --git a/drivers/dma/stm32-dma.c b/drivers/dma/stm32-dma.c
index 4099948b6914..fae7de54f00a 100644
--- a/drivers/dma/stm32-dma.c
+++ b/drivers/dma/stm32-dma.c@@ -441,6 +441,8 @@ static void stm32_dma_dump_reg(struct stm32_dma_chan *chan) dev_dbg(chan2dev(chan), "SFCR: 0x%08x\n", sfcr); } +static void stm32_dma_configure_next_sg(struct stm32_dma_chan *chan); + static void stm32_dma_start_transfer(struct stm32_dma_chan *chan) { struct stm32_dma_device *dmadev = stm32_dma_get_dev(chan);
@@ -483,6 +485,9 @@ static void stm32_dma_start_transfer(struct stm32_dma_chan *chan) if (status) stm32_dma_irq_clear(chan, status); + if (chan->desc->cyclic) + stm32_dma_configure_next_sg(chan); + stm32_dma_dump_reg(chan); /* Start DMA */
@@ -576,8 +581,7 @@ static void stm32_dma_issue_pending(struct dma_chan *c) if (vchan_issue_pending(&chan->vchan) && !chan->desc && !chan->busy) { dev_dbg(chan2dev(chan), "vchan %p: issued\n", &chan->vchan); stm32_dma_start_transfer(chan); - if (chan->desc->cyclic) - stm32_dma_configure_next_sg(chan); + } spin_unlock_irqrestore(&chan->vchan.lock, flags); }