Thread (1 message) 1 message, 1 author, 2021-12-01

Re: [PATCH 2/2] vdpa/mlx5: Support configuring max data virtqueues

From: Si-Wei Liu <hidden>
Date: 2021-12-01 01:43:53


On 11/30/2021 1:48 AM, Eli Cohen wrote:
quoted hunk
Check if the required number of data virtqueues was provided when a
adding a new device and verify the new value does not exceed device
capabilities.

In addition, change the arrays holding virtqueue and callback contexts
to be dynamically allocated.

Signed-off-by: Eli Cohen <redacted>
---
  drivers/vdpa/mlx5/net/mlx5_vnet.c | 32 +++++++++++++++++++------------
  1 file changed, 20 insertions(+), 12 deletions(-)
diff --git a/drivers/vdpa/mlx5/net/mlx5_vnet.c b/drivers/vdpa/mlx5/net/mlx5_vnet.c
index 63813fbb5f62..54e276e0df18 100644
--- a/drivers/vdpa/mlx5/net/mlx5_vnet.c
+++ b/drivers/vdpa/mlx5/net/mlx5_vnet.c
@@ -131,11 +131,6 @@ struct mlx5_vdpa_virtqueue {
  	struct mlx5_vq_restore_info ri;
  };
  
-/* We will remove this limitation once mlx5_vdpa_alloc_resources()
- * provides for driver space allocation
- */
-#define MLX5_MAX_SUPPORTED_VQS 16
-
  static bool is_index_valid(struct mlx5_vdpa_dev *mvdev, u16 idx)
  {
  	if (unlikely(idx > mvdev->max_idx))
@@ -148,8 +143,8 @@ struct mlx5_vdpa_net {
  	struct mlx5_vdpa_dev mvdev;
  	struct mlx5_vdpa_net_resources res;
  	struct virtio_net_config config;
-	struct mlx5_vdpa_virtqueue vqs[MLX5_MAX_SUPPORTED_VQS];
-	struct vdpa_callback event_cbs[MLX5_MAX_SUPPORTED_VQS + 1];
+	struct mlx5_vdpa_virtqueue *vqs;
+	struct vdpa_callback *event_cbs;
  
  	/* Serialize vq resources creation and destruction. This is required
  	 * since memory map might change and we need to destroy and create
@@ -1218,7 +1213,7 @@ static void suspend_vqs(struct mlx5_vdpa_net *ndev)
  {
  	int i;
  
-	for (i = 0; i < MLX5_MAX_SUPPORTED_VQS; i++)
+	for (i = 0; i < ndev->mvdev.max_vqs; i++)
  		suspend_vq(ndev, &ndev->vqs[i]);
  }
  
@@ -1245,7 +1240,7 @@ static int create_rqt(struct mlx5_vdpa_net *ndev)
  	int i, j;
  	int err;
  
-	max_rqt = min_t(int, MLX5_MAX_SUPPORTED_VQS / 2,
+	max_rqt = min_t(int, ndev->mvdev.max_vqs  / 2,
  			1 << MLX5_CAP_GEN(ndev->mvdev.mdev, log_max_rqt_size));
Here the user configured number of data vqs may get silently capped to 
what the device can support (up to 2^log_max_rqt_size). Do you consider 
expose this device specific capacity to vdpa users so it doesn't get 
blindly misconfigured, and/or return appropriate error message to 
indicate the failure cause?

If mlx5 vdpa really can't support power of 2 number of data vqs due to 
hardware limitation (?), an appropriate message should be returned here.

-Siwei
quoted hunk
  	if (max_rqt < 1)
  		return -EOPNOTSUPP;
@@ -2235,7 +2230,7 @@ static int mlx5_vdpa_reset(struct vdpa_device *vdev)
  	clear_vqs_ready(ndev);
  	mlx5_vdpa_destroy_mr(&ndev->mvdev);
  	ndev->mvdev.status = 0;
-	memset(ndev->event_cbs, 0, sizeof(ndev->event_cbs));
+	memset(ndev->event_cbs, 0, sizeof(*ndev->event_cbs) * (mvdev->max_vqs + 1));
  	ndev->mvdev.actual_features = 0;
  	++mvdev->generation;
  	if (MLX5_CAP_GEN(mvdev->mdev, umem_uid_0)) {
@@ -2308,6 +2303,8 @@ static void mlx5_vdpa_free(struct vdpa_device *vdev)
  	}
  	mlx5_vdpa_free_resources(&ndev->mvdev);
  	mutex_destroy(&ndev->reslock);
+	kfree(ndev->event_cbs);
+	kfree(ndev->vqs);
  }
  
  static struct vdpa_notification_area mlx5_get_vq_notification(struct vdpa_device *vdev, u16 idx)
@@ -2547,13 +2544,23 @@ static int mlx5_vdpa_dev_add(struct vdpa_mgmt_dev *v_mdev, const char *name,
  
  	/* we save one virtqueue for control virtqueue should we require it */
  	max_vqs = MLX5_CAP_DEV_VDPA_EMULATION(mdev, max_num_virtio_queues);
-	max_vqs = min_t(u32, max_vqs, MLX5_MAX_SUPPORTED_VQS);
+	if (add_config->mask & BIT_ULL(VDPA_ATTR_DEV_NET_CFG_MAX_VQP)) {
+		if (add_config->max_virtqueues > max_vqs)
+			return -EINVAL;
+		max_vqs = min_t(u32, max_vqs, add_config->max_virtqueues);
+	}
  
  	ndev = vdpa_alloc_device(struct mlx5_vdpa_net, mvdev.vdev, mdev->device, &mlx5_vdpa_ops,
  				 name, false);
  	if (IS_ERR(ndev))
  		return PTR_ERR(ndev);
  
+	ndev->vqs = kcalloc(max_vqs, sizeof(*ndev->vqs), GFP_KERNEL);
+	ndev->event_cbs = kcalloc(max_vqs + 1, sizeof(*ndev->event_cbs), GFP_KERNEL);
+	if (!ndev->vqs || !ndev->event_cbs) {
+		err = -ENOMEM;
+		goto err_mtu;
+	}
  	ndev->mvdev.max_vqs = max_vqs;
  	mvdev = &ndev->mvdev;
  	mvdev->mdev = mdev;
@@ -2676,7 +2683,8 @@ static int mlx5v_probe(struct auxiliary_device *adev,
  	mgtdev->mgtdev.ops = &mdev_ops;
  	mgtdev->mgtdev.device = mdev->device;
  	mgtdev->mgtdev.id_table = id_table;
-	mgtdev->mgtdev.config_attr_mask = (1 << VDPA_ATTR_DEV_NET_CFG_MACADDR);
+	mgtdev->mgtdev.config_attr_mask = BIT_ULL(VDPA_ATTR_DEV_NET_CFG_MACADDR) |
+					  BIT_ULL(VDPA_ATTR_DEV_NET_CFG_MAX_VQP);
  	mgtdev->madev = madev;
  
  	err = vdpa_mgmtdev_register(&mgtdev->mgtdev);
_______________________________________________
Virtualization mailing list
Virtualization@lists.linux-foundation.org
https://lists.linuxfoundation.org/mailman/listinfo/virtualization
Keyboard shortcuts
hback out one level
jnext message in thread
kprevious message in thread
ldrill in
Escclose help / fold thread tree
?toggle this help