Hi Viresh, Linus,
On Fri, Jun 11, 2021 at 5:56 AM Viresh Kumar [off-list ref] wrote:
On 10-06-21, 22:46, Linus Walleij wrote:
quoted
thanks for working on this, it's a really interesting driver.
My first question is conceptual:
We previously have Geerts driver for virtualization:
drivers/gpio/gpio-aggregator.c
The idea with the aggregator is that a host script sets up a
unique gpiochip for the virtualized instance using some poking
in sysfs and pass that to the virtual machine.
So this is Linux acting as virtualization host by definition.
The gpio-aggregator is running on the host...
quoted
I think virtio is more abstract and intended for the usecase
where the hypervisor is not Linux, so this should be mentioned
in the commit, possibly also in Kconfig so users immediately
know what usecases the two different drivers are for.
... while the virtio-gpio driver is meant for the guest kernel.
I my PoC "[PATCH QEMU v2 0/5] Add a GPIO backend"[1], I didn't have
a virtio transport, but just hooked into the PL061 GPIO emulation
in QEMU. The PL061 QEMU driver talked to the GPIO backend, which
talked to /dev/gpiochipN on the host.
Well, not actually.
The host can actually be anything. It can be a Xen based dom0, which
runs some proprietary firmware, or Qemu running over Linux.
It is left for the host to decide how it wants to club together the
GPIO pins from host and access them, with Linux host userspace it
would be playing with /dev/gpiochipN, while for a raw one it may
be accessing registers directly.
And so the backend running at host, needs to pass the gpiochip
configurations and only the host understand it.
So QEMU has to translate the virtio-gpio communication to e.g.
/dev/gpiochipN on the host (or a different backend on non-Linux or
bare-metal HV).
The way I test it for now is by running this with Qemu over my x86
box, so my host side is indeed playing with sysfs Linux.
Can you please share a link to the QEMU patches?
quoted
Possibly both could be used: aggregator to pick out the GPIOs
you want into a synthetic GPIO chip, and the actual talk
between the hypervisor/host and the guest using virtio, even
with linux-on-linux.
Not sure if I understand the aggregator thing for now, but we see the
backend running at host (which talks to this Linux driver at guest) as
a userspace thing and not a kernel driver. Not sure if aggregator can
be used like that, but anyway..
The GPIO aggregator came into play after talking to Alexander Graf and
Peter Maydell. To reduce the attack surface, they didn't want QEMU
to be responsible for exporting to the guest a subset of all GPIOs of
a gpiochip, only a full gpiochip. However, the full gpiochip may
contain critical GPIOs you do not want the guest to tamper with.
Hence the GPIO aggregator was born, to take care of aggregating all
GPIOs you want to export to a guest into a new virtual gpiochip.
You can find more information about the GPIO Aggregator's use cases in
"[PATCH v7 0/6] gpio: Add GPIO Aggregator"[2].
[1] https://lore.kernel.org/linux-gpio/20200423090118.11199-1-geert+renesas@glider.be (local)
[2] https://lore.kernel.org/linux-doc/20200511145257.22970-1-geert+renesas@glider.be/ (local)
Gr{oetje,eeting}s,
Geert
--
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@linux-m68k.org
In personal conversations with technical people, I call myself a hacker. But
when I'm talking to journalists I just say "programmer" or something like that.
-- Linus Torvalds
_______________________________________________
Virtualization mailing list
Virtualization@lists.linux-foundation.org
https://lists.linuxfoundation.org/mailman/listinfo/virtualization