Re: [PATCH V2 2/4] vDPA/ifcvf: enable Intel C5000X-PL virtio-net for vDPA

On 2021/3/9 10:28 上午, Zhu, Lingshan wrote:

On 3/9/2021 10:23 AM, Jason Wang wrote:

quoted

On 2021/3/8 4:35 下午, Zhu Lingshan wrote:

quoted

This commit enabled Intel FPGA SmartNIC C5000X-PL virtio-net
for vDPA

Signed-off-by: Zhu Lingshan <redacted>
---
  drivers/vdpa/ifcvf/ifcvf_base.h | 5 +++++
  drivers/vdpa/ifcvf/ifcvf_main.c | 5 +++++
  2 files changed, 10 insertions(+)

diff --git a/drivers/vdpa/ifcvf/ifcvf_base.h 

b/drivers/vdpa/ifcvf/ifcvf_base.h
index 64696d63fe07..75d9a8052039 100644

--- a/drivers/vdpa/ifcvf/ifcvf_base.h
+++ b/drivers/vdpa/ifcvf/ifcvf_base.h

@@ -23,6 +23,11 @@

  #define IFCVF_SUBSYS_VENDOR_ID    0x8086
  #define IFCVF_SUBSYS_DEVICE_ID    0x001A
  +#define C5000X_PL_VENDOR_ID        0x1AF4
+#define C5000X_PL_DEVICE_ID        0x1000
+#define C5000X_PL_SUBSYS_VENDOR_ID    0x8086
+#define C5000X_PL_SUBSYS_DEVICE_ID    0x0001

I just notice that the device is a transtitional one. Any reason for 
doing this?

Note that IFCVF is a moden device anyhow (0x1041). Supporting legacy 
drive may bring many issues (e.g the definition is non-nomartive). 
One example is the support of VIRTIO_F_IOMMU_PLATFORM, legacy driver 
may assume the device can bypass IOMMU.

Thanks

Hi Jason,

This device will support virtio1.0 by default, so has 
VIRTIO_F_IOMMU_PLATFORM by default.

If you device want to force VIRTIO_F_IOMMU_PLATFORM you probably need to 
do what has been done by mlx5 (verify_min_features).

According to the spec, if VIRTIO_F_IOMMU_PLATFORM is not mandatory, when 
it's not negotiated, device needs to disable or bypass IOMMU:


"

If this feature bit is set to 0, then the device has same access to 
memory addresses supplied to it as the driver has. In particular, the 
device will always use physical addresses matching addresses used by the 
driver (typically meaning physical addresses used by the CPU) and not 
translated further, and can access any address supplied to it by the driver.

"

Transitional device gives the software a chance to fall back to virtio 
0.95.

This only applies if you want to passthrough the card to guest directly 
without the help of vDPA.

If we go with vDPA, it doesn't hlep. For virtio-vdpa, we know it will 
negotiated IOMMU_PLATFORM. For vhost-vdpa, Qemu can provide a legacy or 
transitional device on top of a modern vDPA device.

Thanks

ifcvf drives this device in virtio 1.0 mode, set features 
VIRTIO_F_IOMMU_PLATFORM successfully.

Thanks,
Zhu Lingshan

quoted

quoted

+
  #define IFCVF_SUPPORTED_FEATURES \
          ((1ULL << VIRTIO_NET_F_MAC)            | \
           (1ULL << VIRTIO_F_ANY_LAYOUT)            | \

diff --git a/drivers/vdpa/ifcvf/ifcvf_main.c 

b/drivers/vdpa/ifcvf/ifcvf_main.c
index e501ee07de17..26a2dab7ca66 100644

--- a/drivers/vdpa/ifcvf/ifcvf_main.c
+++ b/drivers/vdpa/ifcvf/ifcvf_main.c

@@ -484,6 +484,11 @@ static struct pci_device_id ifcvf_pci_ids[] = {

          IFCVF_DEVICE_ID,
          IFCVF_SUBSYS_VENDOR_ID,
          IFCVF_SUBSYS_DEVICE_ID) },
+    { PCI_DEVICE_SUB(C5000X_PL_VENDOR_ID,
+             C5000X_PL_DEVICE_ID,
+             C5000X_PL_SUBSYS_VENDOR_ID,
+             C5000X_PL_SUBSYS_DEVICE_ID) },
+
      { 0 },
  };
  MODULE_DEVICE_TABLE(pci, ifcvf_pci_ids);

_______________________________________________
Virtualization mailing list
Virtualization@lists.linux-foundation.org
https://lists.linuxfoundation.org/mailman/listinfo/virtualization