[PATCH 2/4] qxl: limit monitor config read retries
From: Gerd Hoffmann <kraxel@redhat.com>
Date: 2017-03-01 10:12:32
Subsystem:
drm driver for qxl virtual gpu, drm drivers, drm drivers and misc gpu patches, the rest · Maintainers:
Dave Airlie, Gerd Hoffmann, David Airlie, Simona Vetter, Maarten Lankhorst, Maxime Ripard, Thomas Zimmermann, Linus Torvalds
Possibly related (same subject, not in this thread)
- 2017-03-08 · [PATCH 2/4] qxl: limit monitor config read retries · Gerd Hoffmann <kraxel@redhat.com>
When reading the monitor config fails, don't retry forever. If it fails ten times in a row just give up to avoid the driver hangs. Also add a small delay after each attempt, so the host has a chance to complete a partial update. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> --- drivers/gpu/drm/qxl/qxl_display.c | 20 ++++++++++++-------- 1 file changed, 12 insertions(+), 8 deletions(-)
diff --git a/drivers/gpu/drm/qxl/qxl_display.c b/drivers/gpu/drm/qxl/qxl_display.c
index 2cd14be..2b99496 100644
--- a/drivers/gpu/drm/qxl/qxl_display.c
+++ b/drivers/gpu/drm/qxl/qxl_display.c@@ -157,19 +157,23 @@ static void qxl_update_offset_props(struct qxl_device *qdev) void qxl_display_read_client_monitors_config(struct qxl_device *qdev) { - struct drm_device *dev = &qdev->ddev; - int status; + int status, retries; - status = qxl_display_copy_rom_client_monitors_config(qdev); - while (status == MONITORS_CONFIG_BAD_CRC) { - qxl_io_log(qdev, "failed crc check for client_monitors_config," - " retrying\n"); + for (retries = 0; retries < 10; retries++) { status = qxl_display_copy_rom_client_monitors_config(qdev); + if (status != MONITORS_CONFIG_BAD_CRC) + break; + udelay(5); + } + if (status == MONITORS_CONFIG_BAD_CRC) { + qxl_io_log(qdev, "config: bad crc\n"); + DRM_DEBUG_KMS("ignoring client monitors config: bad crc"); + return; } if (status == MONITORS_CONFIG_UNCHANGED) { - qxl_io_log(qdev, "config unchanged\n"); - DRM_DEBUG("ignoring unchanged client monitors config"); + qxl_io_log(qdev, "config: unchanged\n"); + DRM_DEBUG_KMS("ignoring client monitors config: unchanged"); return; }
--
1.8.3.1