Hi,

Am Donnerstag, 11. November 2021, 10:41:46 CET schrieb Heiko Stübner:

not wanting to hijack this too much, but does the mac driver also need
some sort of clock handling?

Because on the Icicle I have here, I'm running into "TX timeout" errors:

RISC-V # dhcp
ethernet@20112000: PHY present at 9
ethernet@20112000: Starting autonegotiation...
ethernet@20112000: Autonegotiation complete
ethernet@20112000: link up, 1000Mbps full-duplex (lpa: 0x3800)
BOOTP broadcast 1
ethernet@20112000: TX timeout
BOOTP broadcast 2
ethernet@20112000: TX timeout
BOOTP broadcast 3
ethernet@20112000: TX timeout
BOOTP broadcast 4
ethernet@20112000: TX timeout

The sifive variant of the macb distinguishes between speeds in its
cllk_init callback, so I guess the Icicle might need that as well?

just for "the archive", i.e. when people read this in the future:

I got this solved by updating the HSS to a recent release (2021.11
in this case).

So now I do have working network in u-boot.


Heiko

Am Freitag, 22. Oktober 2021, 10:56:47 CET schrieb Padmarao Begari:

quoted

Update compatible as per Microchip PolarFire SoC ethernet
device node.

Signed-off-by: Padmarao Begari <redacted>
---
 drivers/net/macb.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/net/macb.c b/drivers/net/macb.c
index 8c6461e717..1b867bd5c2 100644
--- a/drivers/net/macb.c
+++ b/drivers/net/macb.c

@@ -1502,7 +1502,7 @@ static const struct udevice_id macb_eth_ids[] = {
 	{ .compatible = "cdns,zynq-gem" },
 	{ .compatible = "sifive,fu540-c000-gem",
 	  .data = (ulong)&sifive_config },
-	{ .compatible = "microchip,mpfs-mss-gem",
+	{ .compatible = "microchip,mpfs-gem",
 	  .data = (ulong)&microchip_config },
 	{ }
 };