4xx: Increase U-Boot size to 384kB for PLU405 boards

Signed-off-by: Matthias Fuchs <redacted>
---
 board/esd/plu405/config.mk |    3 +--
 include/configs/PLU405.h   |    6 +++---
 2 files changed, 4 insertions(+), 5 deletions(-)

diff --git a/board/esd/plu405/config.mk b/board/esd/plu405/config.mk
index 25b2105..0fb4efa 100644
--- a/board/esd/plu405/config.mk
+++ b/board/esd/plu405/config.mk

@@ -25,5 +25,4 @@
 # esd PLU405 boards
 #
 
-TEXT_BASE = 0xFFFC0000
-#TEXT_BASE = 0x00FC0000
+TEXT_BASE = 0xFFFA0000

diff --git a/include/configs/PLU405.h b/include/configs/PLU405.h
index a3d1c56..0e04691 100644
--- a/include/configs/PLU405.h
+++ b/include/configs/PLU405.h

@@ -262,10 +262,10 @@
  * Please note that CFG_SDRAM_BASE _must_ start at 0
  */
 #define CFG_SDRAM_BASE		0x00000000
-#define CFG_FLASH_BASE		0xFFFC0000
+#define CFG_FLASH_BASE		0xFFFA0000
 #define CFG_MONITOR_BASE	TEXT_BASE
-#define CFG_MONITOR_LEN		(256 * 1024)	/* Reserve 256 kB for Monitor	*/
-#define CFG_MALLOC_LEN		(256 * 1024)	/* Reserve 256 kB for malloc()	*/
+#define CFG_MONITOR_LEN		(384 * 1024)	/* Reserve 256 kB for Monitor	*/
+#define CFG_MALLOC_LEN		(384 * 1024)	/* Reserve 256 kB for malloc()	*/
 
 #if (CFG_MONITOR_BASE < FLASH_BASE0_PRELIM)
 # define CFG_RAMBOOT		1

-- 
1.5.3

On Tuesday 02 September 2008, Matthias Fuchs wrote:

Signed-off-by: Matthias Fuchs <redacted>

All [1...6] applied to u-boot-ppc4xx.

Matthias, please use "ppc4xx:" instead of "4xx" next time. Thanks.

Best regards,
Stefan

=====================================================================
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-0 Fax: +49-8142-66989-80  Email: office at denx.de
=====================================================================