Thread (2 messages) flat view 2 messages, 2 authors, 5d ago

FAILED: patch "[PATCH] arm64: mm: Fix the lockless page-table walk in show_pte()" failed to apply to 5.10-stable tree

From: <gregkh@linuxfoundation.org>
Date: 2026-09-09 09:46:51
Subsystem: arm64 port (aarch64 architecture), the rest · Maintainers: Catalin Marinas, Will Deacon, Linus Torvalds

The patch below does not apply to the 5.10-stable tree.
If someone wants it applied there, or to any other stable or longterm
tree, then please email the backport, including the original git commit
id to [off-list ref].

To reproduce the conflict and resubmit, you may use the following commands:

git fetch https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/ linux-5.10.y
git checkout FETCH_HEAD
git cherry-pick -x a77644d009dece1104b6fcc6e322b0e4503db0d6
# <resolve conflicts, build, test, etc.>
git commit -s
git send-email --to '[off-list ref]' --in-reply-to '2026090941-sustainer-talisman-a5d7@gregkh' --subject-prefix 'PATCH 5.10.y' 'HEAD^..'

Possible dependencies:



thanks,

greg k-h

------------------ original commit in Linus's tree ------------------

From a77644d009dece1104b6fcc6e322b0e4503db0d6 Mon Sep 17 00:00:00 2001
From: Karl Mehltretter <redacted>
Date: Fri, 28 Aug 2026 19:41:31 +0200
Subject: [PATCH] arm64: mm: Fix the lockless page-table walk in show_pte()

show_pte() walks page tables locklessly and can run with interrupts
enabled. A concurrent teardown can free a table page while it is being
walked. It can also clear a parent entry after show_pte() checked it; the
regular pXd_offset() helpers then reread the cleared entry and can derive a
bogus lower-level pointer and fault again.

Use the lockless offset helpers with the saved parent entries, as
gup_fast() does, and pass the saved PMD to pte_offset_map().

For task page tables, arm64 selects MMU_GATHER_RCU_TABLE_FREE. Disable
local interrupts around the walk to hold off RCU-deferred table frees and
block the tlb_remove_table_sync_one() IPI until the walk is finished.

Place the IRQ guard after the header print. This does not make the output a
consistent snapshot, but prevents the task page-table walk from
dereferencing a released table page or deriving a pointer from a different
parent value.

Fixes: 1d18c47c735e ("arm64: MMU fault handling and page table management")
Cc: stable@vger.kernel.org
Assisted-by: LLM
Signed-off-by: Karl Mehltretter <redacted>
Signed-off-by: Will Deacon <will@kernel.org>
diff --git a/arch/arm64/mm/fault.c b/arch/arm64/mm/fault.c
index 0b52557652be..75c3e463df2e 100644
--- a/arch/arm64/mm/fault.c
+++ b/arch/arm64/mm/fault.c
@@ -16,6 +16,7 @@
 #include <linux/mm.h>
 #include <linux/hardirq.h>
 #include <linux/init.h>
+#include <linux/irqflags.h>
 #include <linux/kasan.h>
 #include <linux/kprobes.h>
 #include <linux/uaccess.h>
@@ -154,6 +155,9 @@ static void show_pte(unsigned long addr)
 	pr_alert("%s pgtable: %luk pages, %llu-bit VAs, pgdp=%016lx\n",
 		 mm == &init_mm ? "swapper" : "user", PAGE_SIZE / SZ_1K,
 		 vabits_actual, mm_to_pgd_phys(mm));
+
+	guard(irqsave)();
+
 	pgdp = pgd_offset(mm, addr);
 	pgd = READ_ONCE(*pgdp);
 	pr_alert("[%016lx] pgd=%016llx", addr, pgd_val(pgd));
@@ -167,25 +171,25 @@ static void show_pte(unsigned long addr)
 		if (pgd_none(pgd) || pgd_bad(pgd))
 			break;
 
-		p4dp = p4d_offset(pgdp, addr);
+		p4dp = p4d_offset_lockless(pgdp, pgd, addr);
 		p4d = READ_ONCE(*p4dp);
 		pr_cont(", p4d=%016llx", p4d_val(p4d));
 		if (p4d_none(p4d) || p4d_bad(p4d))
 			break;
 
-		pudp = pud_offset(p4dp, addr);
+		pudp = pud_offset_lockless(p4dp, p4d, addr);
 		pud = READ_ONCE(*pudp);
 		pr_cont(", pud=%016llx", pud_val(pud));
 		if (pud_none(pud) || pud_bad(pud))
 			break;
 
-		pmdp = pmd_offset(pudp, addr);
+		pmdp = pmd_offset_lockless(pudp, pud, addr);
 		pmd = READ_ONCE(*pmdp);
 		pr_cont(", pmd=%016llx", pmd_val(pmd));
 		if (pmd_none(pmd) || pmd_bad(pmd))
 			break;
 
-		ptep = pte_offset_map(pmdp, addr);
+		ptep = pte_offset_map(&pmd, addr);
 		if (!ptep)
 			break;
 
Keyboard shortcuts
hback out one level
jnext message in thread
kprevious message in thread
ldrill in
Escclose help / fold thread tree
?toggle this help