Subject: Re: [PATCH v2 0/8] Add Aspeed AST2700 SDRAM EDAC support
On Tue, 2026-09-08 at 07:13 +0000, Ryan Chen wrote:
quoted
quoted
Subject: Re: [PATCH v2 0/8] Add Aspeed AST2700 SDRAM EDAC support
On Mon, Aug 24, 2026 at 10:42:27AM +0800, Ryan Chen wrote:
quoted
Add ECC error reporting for the Aspeed AST2700 SoC to the existing
aspeed_edac driver.
The AST2700 memory controller keeps the same overall EDAC
programming model as the earlier Aspeed BMC SoCs, but uses a
different register layout, a split interrupt status/clear/mask scheme and
DDR4/DDR5 memory.
quoted
quoted
quoted
Rather than fork the driver, the existing code is first tidied and
generalised, then the AST2700 is added as one more per-SoC variant.
Patches 2-5 are bug fixes and cleanups to the existing driver.
Patches
6 and 7 rework the implementation to accommodate the AST2700.
Patch 8 adds the AST2700 support itself.
Sashiko has comments:
https://sashiko.dev/#/patchset/20260824-edac-v2-0-c8d8bb693586%40asp
eed
tech.com
Please address them: if valid, fix them, if not, explain why they
don't need to be fixed.
Btw, I don't see Stefan reviewing this driver and his last mail on
LKML is from
2025 so it looks like we'll orphan this driver too.
Thx.
--
Regards/Gruss,
Boris.
https://people.kernel.org/tglx/notes-about-netiquette
Hello Boris,
Thanks your review.
I've already replied to both of Sashiko's findings on their respective
threads:
6/8:
https://sashiko.dev/#/message/TY2PPF5CB9A1BE61E82EEE55F3F725362CCF2A
D2
quoted
%40TY2PPF5CB9A1BE6.apcprd06.prod.outlook.com
8/8:
https://sashiko.dev/#/message/TY2PPF5CB9A1BE62172BCC358347C4836CCF2
AD2
quoted
%40TY2PPF5CB9A1BE6.apcprd06.prod.outlook.com
Short version: neither needs a code change. On 8/8 the premise doesn't
hold - u-boot masks every implemented DRAMC interrupt source (INT_MASK
reads GENMASK(16, 0), bits 31:17 are not implemented), so no non-ECC
source can raise the line and the spurious detector cannot kick in.
I feel this is a fragile analysis given multiple components involved. I think it
would be easier and safer (both in terms of kernel behaviour and guarding
against change in u-boot behaviour) if we have the kernel driver take complete
ownership of the interrupt configuration.
Hello Andrew.
Thanks your review. I will modify with following.
#define AST2700_INT_ALL GENMASK(16, 0)
static void ast2700_set_irq(struct aspeed_edac *priv, bool enable)
{
+ u32 val = AST2700_INT_ALL;
guard(raw_spinlock_irqsave)(&priv->lock);
if (enable)
val &= ~AST2700_INT_ECC;
writel(val, priv->regs + AST2700_INT_MASK);
}
static int config_irq(struct mem_ctl_info *mci, struct platform_device *pdev)
{
...
+ priv->chip->set_irq(priv, false);
rc = devm_request_irq(&pdev->dev, irq, priv->chip->isr, IRQF_TRIGGER_HIGH,
DRV_NAME, mci);
if (rc)
return rc;
priv->irq = irq;
/* enable interrupts */
priv->chip->set_irq(priv, true);
return 0;
}