[PATCH 6.2 0925/1001] ARM: dts: exynos: correct TMU phandle in Odroid HC1
From: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Date: 2023-03-07 18:03:25
Also in:
linux-patches
From: Krzysztof Kozlowski <redacted>
commit 2e3d0e20d8456f876607a8af61fdb83dfbf98cb6 upstream.
TMU node uses 0 as thermal-sensor-cells, thus thermal zone referencing
it must not have an argument to phandle. This was not critical before,
but since rework of thermal Devicetree initialization in the
commit 3fd6d6e2b4e8 ("thermal/of: Rework the thermal device tree
initialization"), this leads to errors registering thermal zones other
than first one:
thermal_sys: cpu0-thermal: Failed to read thermal-sensors cells: -2
thermal_sys: Failed to find thermal zone for tmu id=0
exynos-tmu 10064000.tmu: Failed to register sensor: -2
exynos-tmu: probe of 10064000.tmu failed with error -2
Fixes: 1ac49427b566 ("ARM: dts: exynos: Add support for Hardkernel's Odroid HC1 board")
Cc: <redacted>
Link: https://lore.kernel.org/r/20230209105841.779596-5-krzysztof.kozlowski@linaro.org (local)
Signed-off-by: Krzysztof Kozlowski <redacted>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
arch/arm/boot/dts/exynos5422-odroidhc1.dts | 10 +++++-----
1 file changed, 5 insertions(+), 5 deletions(-)
--- a/arch/arm/boot/dts/exynos5422-odroidhc1.dts
+++ b/arch/arm/boot/dts/exynos5422-odroidhc1.dts@@ -31,7 +31,7 @@ thermal-zones { cpu0_thermal: cpu0-thermal { - thermal-sensors = <&tmu_cpu0 0>; + thermal-sensors = <&tmu_cpu0>; trips { cpu0_alert0: cpu-alert-0 { temperature = <70000>; /* millicelsius */
@@ -86,7 +86,7 @@ }; }; cpu1_thermal: cpu1-thermal { - thermal-sensors = <&tmu_cpu1 0>; + thermal-sensors = <&tmu_cpu1>; trips { cpu1_alert0: cpu-alert-0 { temperature = <70000>;
@@ -130,7 +130,7 @@ }; }; cpu2_thermal: cpu2-thermal { - thermal-sensors = <&tmu_cpu2 0>; + thermal-sensors = <&tmu_cpu2>; trips { cpu2_alert0: cpu-alert-0 { temperature = <70000>;
@@ -174,7 +174,7 @@ }; }; cpu3_thermal: cpu3-thermal { - thermal-sensors = <&tmu_cpu3 0>; + thermal-sensors = <&tmu_cpu3>; trips { cpu3_alert0: cpu-alert-0 { temperature = <70000>;
@@ -218,7 +218,7 @@ }; }; gpu_thermal: gpu-thermal { - thermal-sensors = <&tmu_gpu 0>; + thermal-sensors = <&tmu_gpu>; trips { gpu_alert0: gpu-alert-0 { temperature = <70000>;