Thread (3 messages) 3 messages, 3 authors, 2021-10-26

Re: [PATCH] mmc: cqhci: clear HALT state after CQE enable

From: Ulf Hansson <hidden>
Date: 2021-10-26 15:41:29
Also in: linux-arm-kernel, linux-mediatek, linux-mmc, lkml

On Tue, 26 Oct 2021 at 09:08, Wenbin Mei [off-list ref] wrote:
While mmc0 enter suspend state, we need halt CQE to send legacy cmd(flush
cache) and disable cqe, for resume back, we enable CQE and not clear HALT
state.
In this case MediaTek mmc host controller will keep the value for HALT
state after CQE disable/enable flow, so the next CQE transfer after resume
will be timeout due to CQE is in HALT state, the log as below:
<4>.(4)[318:kworker/4:1H]mmc0: cqhci: timeout for tag 2
<4>.(4)[318:kworker/4:1H]mmc0: cqhci: ============ CQHCI REGISTER DUMP ===========
<4>.(4)[318:kworker/4:1H]mmc0: cqhci: Caps:      0x100020b6 | Version:  0x00000510
<4>.(4)[318:kworker/4:1H]mmc0: cqhci: Config:    0x00001103 | Control:  0x00000001
<4>.(4)[318:kworker/4:1H]mmc0: cqhci: Int stat:  0x00000000 | Int enab: 0x00000006
<4>.(4)[318:kworker/4:1H]mmc0: cqhci: Int sig:   0x00000006 | Int Coal: 0x00000000
<4>.(4)[318:kworker/4:1H]mmc0: cqhci: TDL base:  0xfd05f000 | TDL up32: 0x00000000
<4>.(4)[318:kworker/4:1H]mmc0: cqhci: Doorbell:  0x8000203c | TCN:      0x00000000
<4>.(4)[318:kworker/4:1H]mmc0: cqhci: Dev queue: 0x00000000 | Dev Pend: 0x00000000
<4>.(4)[318:kworker/4:1H]mmc0: cqhci: Task clr:  0x00000000 | SSC1:     0x00001000
<4>.(4)[318:kworker/4:1H]mmc0: cqhci: SSC2:      0x00000001 | DCMD rsp: 0x00000000
<4>.(4)[318:kworker/4:1H]mmc0: cqhci: RED mask:  0xfdf9a080 | TERRI:    0x00000000
<4>.(4)[318:kworker/4:1H]mmc0: cqhci: Resp idx:  0x00000000 | Resp arg: 0x00000000
<4>.(4)[318:kworker/4:1H]mmc0: cqhci: CRNQP:     0x00000000 | CRNQDUN:  0x00000000
<4>.(4)[318:kworker/4:1H]mmc0: cqhci: CRNQIS:    0x00000000 | CRNQIE:   0x00000000

This change check HALT state after CQE enable, if CQE is in HALT state, we
will clear it.

Signed-off-by: Wenbin Mei <redacted>
Cc: stable@vger.kernel.org
Applied for fixes and by adding a fixes tag, thanks!

Fixes: a4080225f51d ("mmc: cqhci: support for command queue enabled host")

Kind regards
Uffe

quoted hunk ↗ jump to hunk
---
 drivers/mmc/host/cqhci-core.c | 3 +++
 1 file changed, 3 insertions(+)
diff --git a/drivers/mmc/host/cqhci-core.c b/drivers/mmc/host/cqhci-core.c
index ca8329d55f43..b0d30c35c390 100644
--- a/drivers/mmc/host/cqhci-core.c
+++ b/drivers/mmc/host/cqhci-core.c
@@ -282,6 +282,9 @@ static void __cqhci_enable(struct cqhci_host *cq_host)

        cqhci_writel(cq_host, cqcfg, CQHCI_CFG);

+       if (cqhci_readl(cq_host, CQHCI_CTL) & CQHCI_HALT)
+               cqhci_writel(cq_host, 0, CQHCI_CTL);
+
        mmc->cqe_on = true;

        if (cq_host->ops->enable)
--
2.25.1
Keyboard shortcuts
hback out one level
jnext message in thread
kprevious message in thread
ldrill in
Escclose help / fold thread tree
?toggle this help