From: Stephan Gerhold <stephan@gerhold.net>

[ Upstream commit f3076cd8d1d5fa64b5e1fa5affc045c2fc123baa ]

The fuel gauge in the RT5033 PMIC has its own I2C bus and interrupt
line. Therefore, it is not actually part of the RT5033 MFD and needs
its own of_match_table to probe properly.

Also, given that it's independent of the MFD, there is actually
no need to make the Kconfig depend on MFD_RT5033. Although the driver
uses the shared <linux/mfd/rt5033.h> header, there is no compile
or runtime dependency on the RT5033 MFD driver.

Cc: Beomho Seo <redacted>
Cc: Chanwoo Choi <cw00.choi@samsung.com>
Fixes: b847dd96e659 ("power: rt5033_battery: Add RT5033 Fuel gauge device driver")
Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
Signed-off-by: Sebastian Reichel <redacted>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/power/supply/Kconfig          | 3 ++-
 drivers/power/supply/rt5033_battery.c | 7 +++++++
 2 files changed, 9 insertions(+), 1 deletion(-)

diff --git a/drivers/power/supply/Kconfig b/drivers/power/supply/Kconfig
index e696364126f1..20a2f93252f9 100644
--- a/drivers/power/supply/Kconfig
+++ b/drivers/power/supply/Kconfig

@@ -712,7 +712,8 @@ config BATTERY_GOLDFISH
 
 config BATTERY_RT5033
 	tristate "RT5033 fuel gauge support"
-	depends on MFD_RT5033
+	depends on I2C
+	select REGMAP_I2C
 	help
 	  This adds support for battery fuel gauge in Richtek RT5033 PMIC.
 	  The fuelgauge calculates and determines the battery state of charge

diff --git a/drivers/power/supply/rt5033_battery.c b/drivers/power/supply/rt5033_battery.c
index f330452341f0..9ad0afe83d1b 100644
--- a/drivers/power/supply/rt5033_battery.c
+++ b/drivers/power/supply/rt5033_battery.c

@@ -164,9 +164,16 @@ static const struct i2c_device_id rt5033_battery_id[] = {
 };
 MODULE_DEVICE_TABLE(i2c, rt5033_battery_id);
 
+static const struct of_device_id rt5033_battery_of_match[] = {
+	{ .compatible = "richtek,rt5033-battery", },
+	{ }
+};
+MODULE_DEVICE_TABLE(of, rt5033_battery_of_match);
+
 static struct i2c_driver rt5033_battery_driver = {
 	.driver = {
 		.name = "rt5033-battery",
+		.of_match_table = rt5033_battery_of_match,
 	},
 	.probe = rt5033_battery_probe,
 	.remove = rt5033_battery_remove,

-- 
2.30.2