[PATCH 5.11 525/775] i40e: Fix overwriting flow control settings during driver loading
From: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Date: 2021-03-02 05:53:43
Also in:
lkml
Subsystem:
intel ethernet drivers, networking drivers, the rest · Maintainers:
Tony Nguyen, Przemek Kitszel, Andrew Lunn, "David S. Miller", Eric Dumazet, Jakub Kicinski, Paolo Abeni, Linus Torvalds
From: Mateusz Palczewski <redacted>
[ Upstream commit 4cdb9f80dcd46aab3c0020b4a6920c22735c5d6e ]
During driver loading flow control settings were written to FW
using a variable which was always zero, since it was being set
only by ethtool. This behavior has been corrected and driver
no longer overwrites the default FW/NVM settings.
Fixes: 373149fc99a0 ("i40e: Decrease the scope of rtnl lock")
Signed-off-by: Dawid Lukwinski <redacted>
Signed-off-by: Mateusz Palczewski <redacted>
Reviewed-by: Aleksandr Loktionov <redacted>
Tested-by: Tony Brelinski <redacted>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/net/ethernet/intel/i40e/i40e_main.c | 27 ---------------------
1 file changed, 27 deletions(-)
diff --git a/drivers/net/ethernet/intel/i40e/i40e_main.c b/drivers/net/ethernet/intel/i40e/i40e_main.c
index 9b1251a710c09..bcfa6dcac29f7 100644
--- a/drivers/net/ethernet/intel/i40e/i40e_main.c
+++ b/drivers/net/ethernet/intel/i40e/i40e_main.c@@ -10005,7 +10005,6 @@ static void i40e_rebuild(struct i40e_pf *pf, bool reinit, bool lock_acquired) int old_recovery_mode_bit = test_bit(__I40E_RECOVERY_MODE, pf->state); struct i40e_vsi *vsi = pf->vsi[pf->lan_vsi]; struct i40e_hw *hw = &pf->hw; - u8 set_fc_aq_fail = 0; i40e_status ret; u32 val; int v;
@@ -10131,13 +10130,6 @@ static void i40e_rebuild(struct i40e_pf *pf, bool reinit, bool lock_acquired) i40e_stat_str(&pf->hw, ret), i40e_aq_str(&pf->hw, pf->hw.aq.asq_last_status)); - /* make sure our flow control settings are restored */ - ret = i40e_set_fc(&pf->hw, &set_fc_aq_fail, true); - if (ret) - dev_dbg(&pf->pdev->dev, "setting flow control: ret = %s last_status = %s\n", - i40e_stat_str(&pf->hw, ret), - i40e_aq_str(&pf->hw, pf->hw.aq.asq_last_status)); - /* Rebuild the VSIs and VEBs that existed before reset. * They are still in our local switch element arrays, so only * need to rebuild the switch model in the HW.
@@ -14720,7 +14712,6 @@ static int i40e_probe(struct pci_dev *pdev, const struct pci_device_id *ent) int err; u32 val; u32 i; - u8 set_fc_aq_fail; err = pci_enable_device_mem(pdev); if (err)
@@ -15054,24 +15045,6 @@ static int i40e_probe(struct pci_dev *pdev, const struct pci_device_id *ent) } INIT_LIST_HEAD(&pf->vsi[pf->lan_vsi]->ch_list); - /* Make sure flow control is set according to current settings */ - err = i40e_set_fc(hw, &set_fc_aq_fail, true); - if (set_fc_aq_fail & I40E_SET_FC_AQ_FAIL_GET) - dev_dbg(&pf->pdev->dev, - "Set fc with err %s aq_err %s on get_phy_cap\n", - i40e_stat_str(hw, err), - i40e_aq_str(hw, hw->aq.asq_last_status)); - if (set_fc_aq_fail & I40E_SET_FC_AQ_FAIL_SET) - dev_dbg(&pf->pdev->dev, - "Set fc with err %s aq_err %s on set_phy_config\n", - i40e_stat_str(hw, err), - i40e_aq_str(hw, hw->aq.asq_last_status)); - if (set_fc_aq_fail & I40E_SET_FC_AQ_FAIL_UPDATE) - dev_dbg(&pf->pdev->dev, - "Set fc with err %s aq_err %s on get_link_info\n", - i40e_stat_str(hw, err), - i40e_aq_str(hw, hw->aq.asq_last_status)); - /* if FDIR VSI was set up, start it now */ for (i = 0; i < pf->num_alloc_vsi; i++) { if (pf->vsi[i] && pf->vsi[i]->type == I40E_VSI_FDIR) {
--
2.27.0