Thread (277 messages) 277 messages, 11 authors, 2022-03-02
STALE1551d REVIEWED: 1 (0M)

[PATCH 4.19 124/247] clk: sunxi-ng: h6: Fix clock divider range on some clocks

From: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Date: 2021-03-01 20:48:55
Also in: lkml
Subsystem: arm/allwinner sunxi soc support, common clk framework, the rest · Maintainers: Chen-Yu Tsai, Jernej Skrabec, Samuel Holland, Michael Turquette, Stephen Boyd, Linus Torvalds

From: Andre Przywara <andre.przywara@arm.com>

[ Upstream commit 04ef679591c76571a9e7d5ca48316cc86fa0ef12 ]

While comparing clocks between the H6 and H616, some of the M factor
ranges were found to be wrong: the manual says they are only covering
two bits [1:0], but our code had "5" in the number-of-bits field.

By writing 0xff into that register in U-Boot and via FEL, it could be
confirmed that bits [4:2] are indeed masked off, so the manual is right.

Change to number of bits in the affected clock's description.

Fixes: 524353ea480b ("clk: sunxi-ng: add support for the Allwinner H6 CCU")
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Reviewed-by: Jernej Skrabec <redacted>
Signed-off-by: Maxime Ripard <redacted>
Link: https://lore.kernel.org/r/20210118000912.28116-1-andre.przywara@arm.com (local)
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/clk/sunxi-ng/ccu-sun50i-h6.c | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)
diff --git a/drivers/clk/sunxi-ng/ccu-sun50i-h6.c b/drivers/clk/sunxi-ng/ccu-sun50i-h6.c
index 3449dcf1908ef..1197ace591247 100644
--- a/drivers/clk/sunxi-ng/ccu-sun50i-h6.c
+++ b/drivers/clk/sunxi-ng/ccu-sun50i-h6.c
@@ -223,7 +223,7 @@ static const char * const psi_ahb1_ahb2_parents[] = { "osc24M", "osc32k",
 static SUNXI_CCU_MP_WITH_MUX(psi_ahb1_ahb2_clk, "psi-ahb1-ahb2",
 			     psi_ahb1_ahb2_parents,
 			     0x510,
-			     0, 5,	/* M */
+			     0, 2,	/* M */
 			     8, 2,	/* P */
 			     24, 2,	/* mux */
 			     0);
@@ -232,19 +232,19 @@ static const char * const ahb3_apb1_apb2_parents[] = { "osc24M", "osc32k",
 						       "psi-ahb1-ahb2",
 						       "pll-periph0" };
 static SUNXI_CCU_MP_WITH_MUX(ahb3_clk, "ahb3", ahb3_apb1_apb2_parents, 0x51c,
-			     0, 5,	/* M */
+			     0, 2,	/* M */
 			     8, 2,	/* P */
 			     24, 2,	/* mux */
 			     0);
 
 static SUNXI_CCU_MP_WITH_MUX(apb1_clk, "apb1", ahb3_apb1_apb2_parents, 0x520,
-			     0, 5,	/* M */
+			     0, 2,	/* M */
 			     8, 2,	/* P */
 			     24, 2,	/* mux */
 			     0);
 
 static SUNXI_CCU_MP_WITH_MUX(apb2_clk, "apb2", ahb3_apb1_apb2_parents, 0x524,
-			     0, 5,	/* M */
+			     0, 2,	/* M */
 			     8, 2,	/* P */
 			     24, 2,	/* mux */
 			     0);
-- 
2.27.0


Keyboard shortcuts
hback out one level
jnext message in thread
kprevious message in thread
ldrill in
Escclose help / fold thread tree
?toggle this help