[PATCH 3.14 003/125] Disable write buffering on Toshiba ToPIC95
From: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Date: 2015-07-31 21:05:59
Also in:
lkml
3.14-stable review patch. If anyone has any objections, please let me know. ------------------ From: Ryan Underwood <redacted> commit 2fb22a8042fe96b4220843f79241c116d90922c4 upstream. Disable write buffering on the Toshiba ToPIC95 if it is enabled by somebody (it is not supposed to be a power-on default according to the datasheet). On the ToPIC95, practically no 32-bit Cardbus card will work under heavy load without locking up the whole system if this is left enabled. I tried about a dozen. It does not affect 16-bit cards. This is similar to the O2 bugs in early controller revisions it seems. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=55961 Signed-off-by: Ryan C. Underwood <redacted> Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> --- drivers/pcmcia/topic.h | 16 ++++++++++++++++ 1 file changed, 16 insertions(+)
--- a/drivers/pcmcia/topic.h
+++ b/drivers/pcmcia/topic.h@@ -104,6 +104,9 @@ #define TOPIC_EXCA_IF_CONTROL 0x3e /* 8 bit */ #define TOPIC_EXCA_IFC_33V_ENA 0x01 +#define TOPIC_PCI_CFG_PPBCN 0x3e /* 16-bit */ +#define TOPIC_PCI_CFG_PPBCN_WBEN 0x0400 + static void topic97_zoom_video(struct pcmcia_socket *sock, int onoff) { struct yenta_socket *socket = container_of(sock, struct yenta_socket, socket);
@@ -138,6 +141,7 @@ static int topic97_override(struct yenta static int topic95_override(struct yenta_socket *socket) { u8 fctrl; + u16 ppbcn; /* enable 3.3V support for 16bit cards */ fctrl = exca_readb(socket, TOPIC_EXCA_IF_CONTROL);
@@ -146,6 +150,18 @@ static int topic95_override(struct yenta /* tell yenta to use exca registers to power 16bit cards */ socket->flags |= YENTA_16BIT_POWER_EXCA | YENTA_16BIT_POWER_DF; + /* Disable write buffers to prevent lockups under load with numerous + Cardbus cards, observed on Tecra 500CDT and reported elsewhere on the + net. This is not a power-on default according to the datasheet + but some BIOSes seem to set it. */ + if (pci_read_config_word(socket->dev, TOPIC_PCI_CFG_PPBCN, &ppbcn) == 0 + && socket->dev->revision <= 7 + && (ppbcn & TOPIC_PCI_CFG_PPBCN_WBEN)) { + ppbcn &= ~TOPIC_PCI_CFG_PPBCN_WBEN; + pci_write_config_word(socket->dev, TOPIC_PCI_CFG_PPBCN, ppbcn); + dev_info(&socket->dev->dev, "Disabled ToPIC95 Cardbus write buffers.\n"); + } + return 0; }