3.2.67-rc1 review patch.  If anyone has any objections, please let me know.

------------------

From: Bo Shen <redacted>

commit 6785a1034461c2d2c205215f63a50a740896e55b upstream.

When receive data, the RXRDY in status register set by hardware
after a new packet has been stored in the endpoint FIFO. When it
is copied from FIFO, this bit is cleared which make the FIFO can
be accessed again.

In the receive_data() function, this bit RXRDY has been cleared.
So, after the receive_data() function return, this bit should
not be cleared again, or else it may cause the accessing FIFO
corrupt, which will make the data loss.

Fixes: 914a3f3b3754 (USB: add atmel_usba_udc driver)
Acked-by: Nicolas Ferre <redacted>
Signed-off-by: Bo Shen <redacted>
Signed-off-by: Felipe Balbi <redacted>
[bwh: Backported to 3.2: adjust filename]
Signed-off-by: Ben Hutchings <redacted>
---
 drivers/usb/gadget/atmel_usba_udc.c | 1 -
 1 file changed, 1 deletion(-)

--- a/drivers/usb/gadget/atmel_usba_udc.c
+++ b/drivers/usb/gadget/atmel_usba_udc.c

@@ -1597,7 +1597,6 @@ static void usba_ep_irq(struct usba_udc
 	if ((epstatus & epctrl) & USBA_RX_BK_RDY) {
 		DBG(DBG_BUS, "%s: RX data ready\n", ep->ep.name);
 		receive_data(ep);
-		usba_ep_writel(ep, CLR_STA, USBA_RX_BK_RDY);
 	}
 }