Re: Linux 3.4.24

@@ -1,6 +1,6 @@
 VERSION = 3
 PATCHLEVEL = 4
-SUBLEVEL = 23
+SUBLEVEL = 24
 EXTRAVERSION =
 NAME = Saber-toothed Squirrel
 

@@ -18,11 +18,12 @@
 #define HWCAP_THUMBEE	(1 << 11)
 #define HWCAP_NEON	(1 << 12)
 #define HWCAP_VFPv3	(1 << 13)
-#define HWCAP_VFPv3D16	(1 << 14)
+#define HWCAP_VFPv3D16	(1 << 14)	/* also set for VFPv4-D16 */
 #define HWCAP_TLS	(1 << 15)
 #define HWCAP_VFPv4	(1 << 16)
 #define HWCAP_IDIVA	(1 << 17)
 #define HWCAP_IDIVT	(1 << 18)
+#define HWCAP_VFPD32	(1 << 19)	/* set if VFP has 32 regs (not 16) */
 #define HWCAP_IDIV	(HWCAP_IDIVA | HWCAP_IDIVT)
 
 #if defined(__KERNEL__)

@@ -27,9 +27,9 @@
 #if __LINUX_ARM_ARCH__ <= 6
 	ldr	\tmp, =elf_hwcap		    @ may not have MVFR regs
 	ldr	\tmp, [\tmp, #0]
-	tst	\tmp, #HWCAP_VFPv3D16
-	ldceql	p11, cr0, [\base],#32*4		    @ FLDMIAD \base!, {d16-d31}
-	addne	\base, \base, #32*4		    @ step over unused register space
+	tst	\tmp, #HWCAP_VFPD32
+	ldcnel	p11, cr0, [\base],#32*4		    @ FLDMIAD \base!, {d16-d31}
+	addeq	\base, \base, #32*4		    @ step over unused register space
 #else
 	VFPFMRX	\tmp, MVFR0			    @ Media and VFP Feature Register 0
 	and	\tmp, \tmp, #MVFR0_A_SIMD_MASK	    @ A_SIMD field

@@ -51,9 +51,9 @@
 #if __LINUX_ARM_ARCH__ <= 6
 	ldr	\tmp, =elf_hwcap		    @ may not have MVFR regs
 	ldr	\tmp, [\tmp, #0]
-	tst	\tmp, #HWCAP_VFPv3D16
-	stceql	p11, cr0, [\base],#32*4		    @ FSTMIAD \base!, {d16-d31}
-	addne	\base, \base, #32*4		    @ step over unused register space
+	tst	\tmp, #HWCAP_VFPD32
+	stcnel	p11, cr0, [\base],#32*4		    @ FSTMIAD \base!, {d16-d31}
+	addeq	\base, \base, #32*4		    @ step over unused register space
 #else
 	VFPFMRX	\tmp, MVFR0			    @ Media and VFP Feature Register 0
 	and	\tmp, \tmp, #MVFR0_A_SIMD_MASK	    @ A_SIMD field

@@ -701,11 +701,14 @@ static int __init vfp_init(void)
 			elf_hwcap |= HWCAP_VFPv3;
 
 			/*
-			 * Check for VFPv3 D16. CPUs in this configuration
-			 * only have 16 x 64bit registers.
+			 * Check for VFPv3 D16 and VFPv4 D16.  CPUs in
+			 * this configuration only have 16 x 64bit
+			 * registers.
 			 */
 			if (((fmrx(MVFR0) & MVFR0_A_SIMD_MASK)) == 1)
-				elf_hwcap |= HWCAP_VFPv3D16;
+				elf_hwcap |= HWCAP_VFPv3D16; /* also v4-D16 */
+			else
+				elf_hwcap |= HWCAP_VFPD32;
 		}
 #endif
 		/*

@@ -431,7 +431,7 @@ void hpet_msi_unmask(struct irq_data *data)
 
 	/* unmask it */
 	cfg = hpet_readl(HPET_Tn_CFG(hdev->num));
-	cfg |= HPET_TN_FSB;
+	cfg |= HPET_TN_ENABLE | HPET_TN_FSB;
 	hpet_writel(cfg, HPET_Tn_CFG(hdev->num));
 }
 

@@ -442,7 +442,7 @@ void hpet_msi_mask(struct irq_data *data)
 
 	/* mask it */
 	cfg = hpet_readl(HPET_Tn_CFG(hdev->num));
-	cfg &= ~HPET_TN_FSB;
+	cfg &= ~(HPET_TN_ENABLE | HPET_TN_FSB);
 	hpet_writel(cfg, HPET_Tn_CFG(hdev->num));
 }
 

@@ -34,6 +34,7 @@
 #include <linux/dmi.h>
 #include <linux/slab.h>
 #include <linux/suspend.h>
+#include <asm/unaligned.h>
 
 #ifdef CONFIG_ACPI_PROCFS_POWER
 #include <linux/proc_fs.h>

@@ -95,6 +96,18 @@ enum {
 	ACPI_BATTERY_ALARM_PRESENT,
 	ACPI_BATTERY_XINFO_PRESENT,
 	ACPI_BATTERY_QUIRK_PERCENTAGE_CAPACITY,
+	/* On Lenovo Thinkpad models from 2010 and 2011, the power unit
+	   switches between mWh and mAh depending on whether the system
+	   is running on battery or not.  When mAh is the unit, most
+	   reported values are incorrect and need to be adjusted by
+	   10000/design_voltage.  Verified on x201, t410, t410s, and x220.
+	   Pre-2010 and 2012 models appear to always report in mWh and
+	   are thus unaffected (tested with t42, t61, t500, x200, x300,
+	   and x230).  Also, in mid-2012 Lenovo issued a BIOS update for
+	   the 2011 models that fixes the issue (tested on x220 with a
+	   post-1.29 BIOS), but as of Nov. 2012, no such update is
+	   available for the 2010 models.  */
+	ACPI_BATTERY_QUIRK_THINKPAD_MAH,
 };
 
 struct acpi_battery {

@@ -429,6 +442,21 @@ static int acpi_battery_get_info(struct acpi_battery *battery)
 	kfree(buffer.pointer);
 	if (test_bit(ACPI_BATTERY_QUIRK_PERCENTAGE_CAPACITY, &battery->flags))
 		battery->full_charge_capacity = battery->design_capacity;
+	if (test_bit(ACPI_BATTERY_QUIRK_THINKPAD_MAH, &battery->flags) &&
+	    battery->power_unit && battery->design_voltage) {
+		battery->design_capacity = battery->design_capacity *
+		    10000 / battery->design_voltage;
+		battery->full_charge_capacity = battery->full_charge_capacity *
+		    10000 / battery->design_voltage;
+		battery->design_capacity_warning =
+		    battery->design_capacity_warning *
+		    10000 / battery->design_voltage;
+		/* Curiously, design_capacity_low, unlike the rest of them,
+		   is correct.  */
+		/* capacity_granularity_* equal 1 on the systems tested, so
+		   it's impossible to tell if they would need an adjustment
+		   or not if their values were higher.  */
+	}
 	return result;
 }
 

@@ -477,6 +505,11 @@ static int acpi_battery_get_state(struct acpi_battery *battery)
 	    && battery->capacity_now >= 0 && battery->capacity_now <= 100)
 		battery->capacity_now = (battery->capacity_now *
 				battery->full_charge_capacity) / 100;
+	if (test_bit(ACPI_BATTERY_QUIRK_THINKPAD_MAH, &battery->flags) &&
+	    battery->power_unit && battery->design_voltage) {
+		battery->capacity_now = battery->capacity_now *
+		    10000 / battery->design_voltage;
+	}
 	return result;
 }
 

@@ -586,6 +619,24 @@ static void sysfs_remove_battery(struct acpi_battery *battery)
 	mutex_unlock(&battery->sysfs_lock);
 }
 
+static void find_battery(const struct dmi_header *dm, void *private)
+{
+	struct acpi_battery *battery = (struct acpi_battery *)private;
+	/* Note: the hardcoded offsets below have been extracted from
+	   the source code of dmidecode.  */
+	if (dm->type == DMI_ENTRY_PORTABLE_BATTERY && dm->length >= 8) {
+		const u8 *dmi_data = (const u8 *)(dm + 1);
+		int dmi_capacity = get_unaligned((const u16 *)(dmi_data + 6));
+		if (dm->length >= 18)
+			dmi_capacity *= dmi_data[17];
+		if (battery->design_capacity * battery->design_voltage / 1000
+		    != dmi_capacity &&
+		    battery->design_capacity * 10 == dmi_capacity)
+			set_bit(ACPI_BATTERY_QUIRK_THINKPAD_MAH,
+				&battery->flags);
+	}
+}
+
 /*
  * According to the ACPI spec, some kinds of primary batteries can
  * report percentage battery remaining capacity directly to OS.

@@ -611,6 +662,32 @@ static void acpi_battery_quirks(struct acpi_battery *battery)
 		battery->capacity_now = (battery->capacity_now *
 				battery->full_charge_capacity) / 100;
 	}
+
+	if (test_bit(ACPI_BATTERY_QUIRK_THINKPAD_MAH, &battery->flags))
+		return ;
+
+	if (battery->power_unit && dmi_name_in_vendors("LENOVO")) {
+		const char *s;
+		s = dmi_get_system_info(DMI_PRODUCT_VERSION);
+		if (s && !strnicmp(s, "ThinkPad", 8)) {
+			dmi_walk(find_battery, battery);
+			if (test_bit(ACPI_BATTERY_QUIRK_THINKPAD_MAH,
+				     &battery->flags) &&
+			    battery->design_voltage) {
+				battery->design_capacity =
+				    battery->design_capacity *
+				    10000 / battery->design_voltage;
+				battery->full_charge_capacity =
+				    battery->full_charge_capacity *
+				    10000 / battery->design_voltage;
+				battery->design_capacity_warning =
+				    battery->design_capacity_warning *
+				    10000 / battery->design_voltage;
+				battery->capacity_now = battery->capacity_now *
+				    10000 / battery->design_voltage;
+			}
+		}
+	}
 }
 
 static int acpi_battery_update(struct acpi_battery *battery)

@@ -508,6 +508,14 @@ static struct dmi_system_id __initdata acpisleep_dmi_table[] = {
 	},
 	{
 	.callback = init_nvs_nosave,
+	.ident = "Sony Vaio VPCEB1S1E",
+	.matches = {
+		DMI_MATCH(DMI_SYS_VENDOR, "Sony Corporation"),
+		DMI_MATCH(DMI_PRODUCT_NAME, "VPCEB1S1E"),
+		},
+	},
+	{
+	.callback = init_nvs_nosave,
 	.ident = "Sony Vaio VGN-FW520F",
 	.matches = {
 		DMI_MATCH(DMI_SYS_VENDOR, "Sony Corporation"),

@@ -389,6 +389,12 @@ static int __init video_set_bqc_offset(const struct dmi_system_id *d)
 	return 0;
 }
 
+static int video_ignore_initial_backlight(const struct dmi_system_id *d)
+{
+	use_bios_initial_backlight = 0;
+	return 0;
+}
+
 static struct dmi_system_id video_dmi_table[] __initdata = {
 	/*
 	 * Broken _BQC workaround http://bugzilla.kernel.org/show_bug.cgi?id=13121

@@ -433,6 +439,14 @@ static struct dmi_system_id video_dmi_table[] __initdata = {
 		DMI_MATCH(DMI_PRODUCT_NAME, "Aspire 7720"),
 		},
 	},
+	{
+	 .callback = video_ignore_initial_backlight,
+	 .ident = "HP Folio 13-2000",
+	 .matches = {
+		DMI_MATCH(DMI_BOARD_VENDOR, "Hewlett-Packard"),
+		DMI_MATCH(DMI_PRODUCT_NAME, "HP Folio 13 - 2000 Notebook PC"),
+		},
+	},
 	{}
 };
 

@@ -459,12 +459,8 @@ parse_edp(struct drm_i915_private *dev_priv, struct bdb_header *bdb)
 
 	edp = find_section(bdb, BDB_EDP);
 	if (!edp) {
-		if (SUPPORTS_EDP(dev_priv->dev) && dev_priv->edp.support) {
-			DRM_DEBUG_KMS("No eDP BDB found but eDP panel "
-				      "supported, assume %dbpp panel color "
-				      "depth.\n",
-				      dev_priv->edp.bpp);
-		}
+		if (SUPPORTS_EDP(dev_priv->dev) && dev_priv->edp.support)
+			DRM_DEBUG_KMS("No eDP BDB found but eDP panel supported.\n");
 		return;
 	}
 

@@ -617,9 +613,6 @@ init_vbt_defaults(struct drm_i915_private *dev_priv)
 	dev_priv->lvds_use_ssc = 1;
 	dev_priv->lvds_ssc_freq = intel_bios_ssc_frequency(dev, 1);
 	DRM_DEBUG_KMS("Set default to SSC at %dMHz\n", dev_priv->lvds_ssc_freq);
-
-	/* eDP data */
-	dev_priv->edp.bpp = 18;
 }
 
 static int __init intel_no_opregion_vbt_callback(const struct dmi_system_id *id)

@@ -4996,6 +4996,17 @@ static bool intel_choose_pipe_bpp_dither(struct drm_crtc *crtc,
 			}
 		}
 
+		if (intel_encoder->type == INTEL_OUTPUT_EDP) {
+			/* Use VBT settings if we have an eDP panel */
+			unsigned int edp_bpc = dev_priv->edp.bpp / 3;
+
+			if (edp_bpc && edp_bpc < display_bpc) {
+				DRM_DEBUG_KMS("clamping display bpc (was %d) to eDP (%d)\n", display_bpc, edp_bpc);
+				display_bpc = edp_bpc;
+			}
+			continue;
+		}
+
 		/*
 		 * HDMI is either 12 or 8, so if the display lets 10bpc sneak
 		 * through, clamp it down.  (Note: >12bpc will be caught below.)

@@ -31,6 +31,9 @@ MODULE_DESCRIPTION("AMD Family 15h CPU processor power monitor");
 MODULE_AUTHOR("Andreas Herrmann <andreas.herrmann3@amd.com>");
 MODULE_LICENSE("GPL");
 
+/* Family 16h Northbridge's function 4 PCI ID */
+#define PCI_DEVICE_ID_AMD_16H_NB_F4	0x1534
+
 /* D18F3 */
 #define REG_NORTHBRIDGE_CAP		0xe8
 

@@ -256,6 +259,7 @@ static void __devexit fam15h_power_remove(struct pci_dev *pdev)
 
 static DEFINE_PCI_DEVICE_TABLE(fam15h_power_id_table) = {
 	{ PCI_VDEVICE(AMD, PCI_DEVICE_ID_AMD_15H_NB_F4) },
+	{ PCI_VDEVICE(AMD, PCI_DEVICE_ID_AMD_16H_NB_F4) },
 	{}
 };
 MODULE_DEVICE_TABLE(pci, fam15h_power_id_table);

@@ -1066,7 +1066,6 @@ static irqreturn_t sh_mmcif_irqt(int irq, void *dev_id)
 {
 	struct sh_mmcif_host *host = dev_id;
 	struct mmc_request *mrq = host->mrq;
-	struct mmc_data *data = mrq->data;
 
 	cancel_delayed_work_sync(&host->timeout_work);
 

@@ -1114,13 +1113,14 @@ static irqreturn_t sh_mmcif_irqt(int irq, void *dev_id)
 	case MMCIF_WAIT_FOR_READ_END:
 	case MMCIF_WAIT_FOR_WRITE_END:
 		if (host->sd_error)
-			data->error = sh_mmcif_error_manage(host);
+			mrq->data->error = sh_mmcif_error_manage(host);
 		break;
 	default:
 		BUG();
 	}
 
 	if (host->wait_for != MMCIF_WAIT_FOR_STOP) {
+		struct mmc_data *data = mrq->data;
 		if (!mrq->cmd->error && data && !data->error)
 			data->bytes_xfered =
 				data->blocks * data->blksz;

@@ -1191,10 +1191,6 @@ static irqreturn_t sh_mmcif_intr(int irq, void *dev_id)
 		host->sd_error = true;
 		dev_dbg(&host->pd->dev, "int err state = %08x\n", state);
 	}
-	if (host->state == STATE_IDLE) {
-		dev_info(&host->pd->dev, "Spurious IRQ status 0x%x", state);
-		return IRQ_HANDLED;
-	}
 	if (state & ~(INT_CMD12RBE | INT_CMD12CRE)) {
 		if (!host->dma_active)
 			return IRQ_WAKE_THREAD;

@@ -95,6 +95,9 @@ static int pnpacpi_set_resources(struct pnp_dev *dev)
 		return -ENODEV;
 	}
 
+	if (WARN_ON_ONCE(acpi_dev != dev->data))
+		dev->data = acpi_dev;
+
 	ret = pnpacpi_build_resource_template(dev, &buffer);
 	if (ret)
 		return ret;

@@ -3190,12 +3190,12 @@ static void ixj_write_cid(IXJ *j)
 
 	ixj_fsk_alloc(j);
 
-	strcpy(sdmf1, j->cid_send.month);
-	strcat(sdmf1, j->cid_send.day);
-	strcat(sdmf1, j->cid_send.hour);
-	strcat(sdmf1, j->cid_send.min);
-	strcpy(sdmf2, j->cid_send.number);
-	strcpy(sdmf3, j->cid_send.name);
+	strlcpy(sdmf1, j->cid_send.month, sizeof(sdmf1));
+	strlcat(sdmf1, j->cid_send.day, sizeof(sdmf1));
+	strlcat(sdmf1, j->cid_send.hour, sizeof(sdmf1));
+	strlcat(sdmf1, j->cid_send.min, sizeof(sdmf1));
+	strlcpy(sdmf2, j->cid_send.number, sizeof(sdmf2));
+	strlcpy(sdmf3, j->cid_send.name, sizeof(sdmf3));
 
 	len1 = strlen(sdmf1);
 	len2 = strlen(sdmf2);

@@ -3340,12 +3340,12 @@ static void ixj_write_cidcw(IXJ *j)
 		ixj_pre_cid(j);
 	}
 	j->flags.cidcw_ack = 0;
-	strcpy(sdmf1, j->cid_send.month);
-	strcat(sdmf1, j->cid_send.day);
-	strcat(sdmf1, j->cid_send.hour);
-	strcat(sdmf1, j->cid_send.min);
-	strcpy(sdmf2, j->cid_send.number);
-	strcpy(sdmf3, j->cid_send.name);
+	strlcpy(sdmf1, j->cid_send.month, sizeof(sdmf1));
+	strlcat(sdmf1, j->cid_send.day, sizeof(sdmf1));
+	strlcat(sdmf1, j->cid_send.hour, sizeof(sdmf1));
+	strlcat(sdmf1, j->cid_send.min, sizeof(sdmf1));
+	strlcpy(sdmf2, j->cid_send.number, sizeof(sdmf2));
+	strlcpy(sdmf3, j->cid_send.name, sizeof(sdmf3));
 
 	len1 = strlen(sdmf1);
 	len2 = strlen(sdmf2);

@@ -788,6 +788,10 @@ static int get_serial_info(struct acm *acm, struct serial_struct __user *info)
 	tmp.flags = ASYNC_LOW_LATENCY;
 	tmp.xmit_fifo_size = acm->writesize;
 	tmp.baud_base = le32_to_cpu(acm->line.dwDTERate);
+	tmp.close_delay	= acm->port.close_delay / 10;
+	tmp.closing_wait = acm->port.closing_wait == ASYNC_CLOSING_WAIT_NONE ?
+				ASYNC_CLOSING_WAIT_NONE :
+				acm->port.closing_wait / 10;
 
 	if (copy_to_user(info, &tmp, sizeof(tmp)))
 		return -EFAULT;

@@ -795,6 +799,37 @@ static int get_serial_info(struct acm *acm, struct serial_struct __user *info)
 		return 0;
 }
 
+static int set_serial_info(struct acm *acm,
+				struct serial_struct __user *newinfo)
+{
+	struct serial_struct new_serial;
+	unsigned int closing_wait, close_delay;
+	int retval = 0;
+
+	if (copy_from_user(&new_serial, newinfo, sizeof(new_serial)))
+		return -EFAULT;
+
+	close_delay = new_serial.close_delay * 10;
+	closing_wait = new_serial.closing_wait == ASYNC_CLOSING_WAIT_NONE ?
+			ASYNC_CLOSING_WAIT_NONE : new_serial.closing_wait * 10;
+
+	mutex_lock(&acm->port.mutex);
+
+	if (!capable(CAP_SYS_ADMIN)) {
+		if ((close_delay != acm->port.close_delay) ||
+		    (closing_wait != acm->port.closing_wait))
+			retval = -EPERM;
+		else
+			retval = -EOPNOTSUPP;
+	} else {
+		acm->port.close_delay  = close_delay;
+		acm->port.closing_wait = closing_wait;
+	}
+
+	mutex_unlock(&acm->port.mutex);
+	return retval;
+}
+
 static int acm_tty_ioctl(struct tty_struct *tty,
 					unsigned int cmd, unsigned long arg)
 {

@@ -805,6 +840,9 @@ static int acm_tty_ioctl(struct tty_struct *tty,
 	case TIOCGSERIAL: /* gets serial port data */
 		rv = get_serial_info(acm, (struct serial_struct __user *) arg);
 		break;
+	case TIOCSSERIAL:
+		rv = set_serial_info(acm, (struct serial_struct __user *) arg);
+		break;
 	}
 
 	return rv;

@@ -1128,6 +1128,25 @@ dl_done_list (struct ohci_hcd *ohci)
 
 	while (td) {
 		struct td	*td_next = td->next_dl_td;
+		struct ed	*ed = td->ed;
+
+		/*
+		 * Some OHCI controllers (NVIDIA for sure, maybe others)
+		 * occasionally forget to add TDs to the done queue.  Since
+		 * TDs for a given endpoint are always processed in order,
+		 * if we find a TD on the donelist then all of its
+		 * predecessors must be finished as well.
+		 */
+		for (;;) {
+			struct td	*td2;
+
+			td2 = list_first_entry(&ed->td_list, struct td,
+					td_list);
+			if (td2 == td)
+				break;
+			takeback_td(ohci, td2);
+		}
+
 		takeback_td(ohci, td);
 		td = td_next;
 	}

@@ -29,6 +29,7 @@
 /* Device for a quirk */
 #define PCI_VENDOR_ID_FRESCO_LOGIC	0x1b73
 #define PCI_DEVICE_ID_FRESCO_LOGIC_PDK	0x1000
+#define PCI_DEVICE_ID_FRESCO_LOGIC_FL1400	0x1400
 
 #define PCI_VENDOR_ID_ETRON		0x1b6f
 #define PCI_DEVICE_ID_ASROCK_P67	0x7023

@@ -58,8 +59,10 @@ static void xhci_pci_quirks(struct device *dev, struct xhci_hcd *xhci)
 
 	/* Look for vendor-specific quirks */
 	if (pdev->vendor == PCI_VENDOR_ID_FRESCO_LOGIC &&
-			pdev->device == PCI_DEVICE_ID_FRESCO_LOGIC_PDK) {
-		if (pdev->revision == 0x0) {
+			(pdev->device == PCI_DEVICE_ID_FRESCO_LOGIC_PDK ||
+			 pdev->device == PCI_DEVICE_ID_FRESCO_LOGIC_FL1400)) {
+		if (pdev->device == PCI_DEVICE_ID_FRESCO_LOGIC_PDK &&
+				pdev->revision == 0x0) {
 			xhci->quirks |= XHCI_RESET_EP_QUIRK;
 			xhci_dbg(xhci, "QUIRK: Fresco Logic xHC needs configure"
 					" endpoint cmd after reset endpoint\n");

@@ -120,6 +120,7 @@ static const struct usb_device_id id_table[] = {
 	{ USB_DEVICE(0x10C4, 0x8477) }, /* Balluff RFID */
 	{ USB_DEVICE(0x10C4, 0x85EA) }, /* AC-Services IBUS-IF */
 	{ USB_DEVICE(0x10C4, 0x85EB) }, /* AC-Services CIS-IBUS */
+	{ USB_DEVICE(0x10C4, 0x85F8) }, /* Virtenio Preon32 */
 	{ USB_DEVICE(0x10C4, 0x8664) }, /* AC-Services CAN-IF */
 	{ USB_DEVICE(0x10C4, 0x8665) }, /* AC-Services OBD-IF */
 	{ USB_DEVICE(0x10C4, 0xEA60) }, /* Silicon Labs factory default */

@@ -197,6 +197,7 @@ static struct usb_device_id id_table_combined [] = {
 	{ USB_DEVICE(FTDI_VID, FTDI_OPENDCC_THROTTLE_PID) },
 	{ USB_DEVICE(FTDI_VID, FTDI_OPENDCC_GATEWAY_PID) },
 	{ USB_DEVICE(FTDI_VID, FTDI_OPENDCC_GBM_PID) },
+	{ USB_DEVICE(NEWPORT_VID, NEWPORT_AGILIS_PID) },
 	{ USB_DEVICE(INTERBIOMETRICS_VID, INTERBIOMETRICS_IOBOARD_PID) },
 	{ USB_DEVICE(INTERBIOMETRICS_VID, INTERBIOMETRICS_MINI_IOBOARD_PID) },
 	{ USB_DEVICE(FTDI_VID, FTDI_SPROG_II) },

@@ -1810,7 +1811,7 @@ static int ftdi_8u2232c_probe(struct usb_serial *serial)
 	dbg("%s", __func__);
 
 	if ((udev->manufacturer && !strcmp(udev->manufacturer, "CALAO Systems")) ||
-	    (udev->product && !strcmp(udev->product, "BeagleBone/XDS100")))
+	    (udev->product && !strcmp(udev->product, "BeagleBone/XDS100V2")))
 		return ftdi_jtag_probe(serial);
 
 	return 0;

@@ -752,6 +752,12 @@
 #define TTI_VID			0x103E	/* Vendor Id */
 #define TTI_QL355P_PID		0x03E8	/* TTi QL355P power supply */
 
+/*
+ * Newport Cooperation (www.newport.com)
+ */
+#define NEWPORT_VID			0x104D
+#define NEWPORT_AGILIS_PID		0x3000
+
 /* Interbiometrics USB I/O Board */
 /* Developed for Interbiometrics by Rudolf Gugler */
 #define INTERBIOMETRICS_VID              0x1209

@@ -80,6 +80,7 @@ static void option_instat_callback(struct urb *urb);
 #define OPTION_PRODUCT_GTM380_MODEM		0x7201
 
 #define HUAWEI_VENDOR_ID			0x12D1
+#define HUAWEI_PRODUCT_E173			0x140C
 #define HUAWEI_PRODUCT_K4505			0x1464
 #define HUAWEI_PRODUCT_K3765			0x1465
 #define HUAWEI_PRODUCT_K4605			0x14C6

@@ -552,6 +553,8 @@ static const struct usb_device_id option_ids[] = {
 	{ USB_DEVICE(QUANTA_VENDOR_ID, QUANTA_PRODUCT_GLX) },
 	{ USB_DEVICE(QUANTA_VENDOR_ID, QUANTA_PRODUCT_GKE) },
 	{ USB_DEVICE(QUANTA_VENDOR_ID, QUANTA_PRODUCT_GLE) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E173, 0xff, 0xff, 0xff),
+		.driver_info = (kernel_ulong_t) &net_intf1_blacklist },
 	{ USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_K4505, 0xff, 0xff, 0xff),
 		.driver_info = (kernel_ulong_t) &huawei_cdc12_blacklist },
 	{ USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_K3765, 0xff, 0xff, 0xff),

@@ -883,6 +886,10 @@ static const struct usb_device_id option_ids[] = {
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0126, 0xff, 0xff, 0xff),
 		.driver_info = (kernel_ulong_t)&net_intf5_blacklist },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0128, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0135, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0136, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0137, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0139, 0xff, 0xff, 0xff) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0142, 0xff, 0xff, 0xff) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0143, 0xff, 0xff, 0xff) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0144, 0xff, 0xff, 0xff) },

@@ -903,20 +910,34 @@ static const struct usb_device_id option_ids[] = {
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0165, 0xff, 0xff, 0xff) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0167, 0xff, 0xff, 0xff),
 	  .driver_info = (kernel_ulong_t)&net_intf4_blacklist },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0189, 0xff, 0xff, 0xff) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0191, 0xff, 0xff, 0xff), /* ZTE EuFi890 */
 	  .driver_info = (kernel_ulong_t)&net_intf4_blacklist },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0196, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0197, 0xff, 0xff, 0xff) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0199, 0xff, 0xff, 0xff), /* ZTE MF820S */
 	  .driver_info = (kernel_ulong_t)&net_intf1_blacklist },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0200, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0201, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0254, 0xff, 0xff, 0xff) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0257, 0xff, 0xff, 0xff), /* ZTE MF821 */
 	  .driver_info = (kernel_ulong_t)&net_intf3_blacklist },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0265, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0284, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0317, 0xff, 0xff, 0xff) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0326, 0xff, 0xff, 0xff),
 	  .driver_info = (kernel_ulong_t)&net_intf4_blacklist },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0330, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0395, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0414, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0417, 0xff, 0xff, 0xff) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1008, 0xff, 0xff, 0xff),
 	  .driver_info = (kernel_ulong_t)&net_intf4_blacklist },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1010, 0xff, 0xff, 0xff),
 	  .driver_info = (kernel_ulong_t)&net_intf4_blacklist },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1012, 0xff, 0xff, 0xff),
 	  .driver_info = (kernel_ulong_t)&net_intf4_blacklist },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1018, 0xff, 0xff, 0xff) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1021, 0xff, 0xff, 0xff),
 	  .driver_info = (kernel_ulong_t)&net_intf2_blacklist },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1057, 0xff, 0xff, 0xff) },

@@ -1096,6 +1117,10 @@ static const struct usb_device_id option_ids[] = {
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1298, 0xff, 0xff, 0xff) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1299, 0xff, 0xff, 0xff) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1300, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1301, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1302, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1303, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1333, 0xff, 0xff, 0xff) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1401, 0xff, 0xff, 0xff),
 		.driver_info = (kernel_ulong_t)&net_intf2_blacklist },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1402, 0xff, 0xff, 0xff),

@@ -203,7 +203,7 @@ config USB_STORAGE_ENE_UB6250
 
 config USB_UAS
 	tristate "USB Attached SCSI"
-	depends on USB && SCSI
+	depends on USB && SCSI && BROKEN
 	help
 	  The USB Attached SCSI protocol is supported by some USB
 	  storage devices.  It permits higher performance by supporting

@@ -137,16 +137,6 @@ static inline void mpol_cond_put(struct mempolicy *pol)
 		__mpol_put(pol);
 }
 
-extern struct mempolicy *__mpol_cond_copy(struct mempolicy *tompol,
-					  struct mempolicy *frompol);
-static inline struct mempolicy *mpol_cond_copy(struct mempolicy *tompol,
-						struct mempolicy *frompol)
-{
-	if (!frompol)
-		return frompol;
-	return __mpol_cond_copy(tompol, frompol);
-}
-
 extern struct mempolicy *__mpol_dup(struct mempolicy *pol);
 static inline struct mempolicy *mpol_dup(struct mempolicy *pol)
 {

@@ -270,12 +260,6 @@ static inline void mpol_cond_put(struct mempolicy *pol)
 {
 }
 
-static inline struct mempolicy *mpol_cond_copy(struct mempolicy *to,
-						struct mempolicy *from)
-{
-	return from;
-}
-
 static inline void mpol_get(struct mempolicy *pol)
 {
 }

@@ -202,13 +202,13 @@ DEFINE_PER_CPU(struct rcu_dynticks, rcu_dynticks) = {
 	.dynticks = ATOMIC_INIT(1),
 };
 
-static int blimit = 10;		/* Maximum callbacks per rcu_do_batch. */
-static int qhimark = 10000;	/* If this many pending, ignore blimit. */
-static int qlowmark = 100;	/* Once only this many pending, use blimit. */
+static long blimit = 10;	/* Maximum callbacks per rcu_do_batch. */
+static long qhimark = 10000;	/* If this many pending, ignore blimit. */
+static long qlowmark = 100;	/* Once only this many pending, use blimit. */
 
-module_param(blimit, int, 0);
-module_param(qhimark, int, 0);
-module_param(qlowmark, int, 0);
+module_param(blimit, long, 0);
+module_param(qhimark, long, 0);
+module_param(qlowmark, long, 0);
 
 int rcu_cpu_stall_suppress __read_mostly; /* 1 = suppress stall warnings. */
 int rcu_cpu_stall_timeout __read_mostly = CONFIG_RCU_CPU_STALL_TIMEOUT;

@@ -1476,7 +1476,7 @@ static void rcu_do_batch(struct rcu_state *rsp, struct rcu_data *rdp)
 {
 	unsigned long flags;
 	struct rcu_head *next, *list, **tail;
-	int bl, count, count_lazy;
+	long bl, count, count_lazy;
 
 	/* If no callbacks are ready, just return.*/
 	if (!cpu_has_callbacks_ready_to_invoke(rdp)) {

@@ -2368,7 +2368,7 @@ static void reset_iter_read(struct ftrace_iterator *iter)
 {
 	iter->pos = 0;
 	iter->func_pos = 0;
-	iter->flags &= ~(FTRACE_ITER_PRINTALL & FTRACE_ITER_HASH);
+	iter->flags &= ~(FTRACE_ITER_PRINTALL | FTRACE_ITER_HASH);
 }
 
 static void *t_start(struct seq_file *m, loff_t *pos)

@@ -1141,8 +1141,8 @@ int queue_delayed_work_on(int cpu, struct workqueue_struct *wq,
 	if (!test_and_set_bit(WORK_STRUCT_PENDING_BIT, work_data_bits(work))) {
 		unsigned int lcpu;
 
-		BUG_ON(timer_pending(timer));
-		BUG_ON(!list_empty(&work->entry));
+		WARN_ON_ONCE(timer_pending(timer));
+		WARN_ON_ONCE(!list_empty(&work->entry));
 
 		timer_stats_timer_set_start_info(&dwork->timer);
 

@@ -50,7 +50,6 @@ struct dma_pool {		/* the pool */
 	size_t allocation;
 	size_t boundary;
 	char name[32];
-	wait_queue_head_t waitq;
 	struct list_head pools;
 };
 

@@ -62,8 +61,6 @@ struct dma_page {		/* cacheable header for 'allocation' bytes */
 	unsigned int offset;
 };
 
-#define	POOL_TIMEOUT_JIFFIES	((100 /* msec */ * HZ) / 1000)
-
 static DEFINE_MUTEX(pools_lock);
 
 static ssize_t

@@ -172,7 +169,6 @@ struct dma_pool *dma_pool_create(const char *name, struct device *dev,
 	retval->size = size;
 	retval->boundary = boundary;
 	retval->allocation = allocation;
-	init_waitqueue_head(&retval->waitq);
 
 	if (dev) {
 		int ret;

@@ -227,7 +223,6 @@ static struct dma_page *pool_alloc_page(struct dma_pool *pool, gfp_t mem_flags)
 		memset(page->vaddr, POOL_POISON_FREED, pool->allocation);
 #endif
 		pool_initialise_page(pool, page);
-		list_add(&page->page_list, &pool->page_list);
 		page->in_use = 0;
 		page->offset = 0;
 	} else {

@@ -315,30 +310,21 @@ void *dma_pool_alloc(struct dma_pool *pool, gfp_t mem_flags,
 	might_sleep_if(mem_flags & __GFP_WAIT);
 
 	spin_lock_irqsave(&pool->lock, flags);
- restart:
 	list_for_each_entry(page, &pool->page_list, page_list) {
 		if (page->offset < pool->allocation)
 			goto ready;
 	}
-	page = pool_alloc_page(pool, GFP_ATOMIC);
-	if (!page) {
-		if (mem_flags & __GFP_WAIT) {
-			DECLARE_WAITQUEUE(wait, current);
 
-			__set_current_state(TASK_UNINTERRUPTIBLE);
-			__add_wait_queue(&pool->waitq, &wait);
-			spin_unlock_irqrestore(&pool->lock, flags);
+	/* pool_alloc_page() might sleep, so temporarily drop &pool->lock */
+	spin_unlock_irqrestore(&pool->lock, flags);
 
-			schedule_timeout(POOL_TIMEOUT_JIFFIES);
+	page = pool_alloc_page(pool, mem_flags);
+	if (!page)
+		return NULL;
 
-			spin_lock_irqsave(&pool->lock, flags);
-			__remove_wait_queue(&pool->waitq, &wait);
-			goto restart;
-		}
-		retval = NULL;
-		goto done;
-	}
+	spin_lock_irqsave(&pool->lock, flags);
 
+	list_add(&page->page_list, &pool->page_list);
  ready:
 	page->in_use++;
 	offset = page->offset;

@@ -348,7 +334,6 @@ void *dma_pool_alloc(struct dma_pool *pool, gfp_t mem_flags,
 #ifdef	DMAPOOL_DEBUG
 	memset(retval, POOL_POISON_ALLOCATED, pool->size);
 #endif
- done:
 	spin_unlock_irqrestore(&pool->lock, flags);
 	return retval;
 }

@@ -435,8 +420,6 @@ void dma_pool_free(struct dma_pool *pool, void *vaddr, dma_addr_t dma)
 	page->in_use--;
 	*(int *)vaddr = page->offset;
 	page->offset = offset;
-	if (waitqueue_active(&pool->waitq))
-		wake_up_locked(&pool->waitq);
 	/*
 	 * Resist a temptation to do
 	 *    if (!is_page_busy(page)) pool_free_page(pool, page);

@@ -2009,28 +2009,6 @@ struct mempolicy *__mpol_dup(struct mempolicy *old)
 	return new;
 }
 
-/*
- * If *frompol needs [has] an extra ref, copy *frompol to *tompol ,
- * eliminate the * MPOL_F_* flags that require conditional ref and
- * [NOTE!!!] drop the extra ref.  Not safe to reference *frompol directly
- * after return.  Use the returned value.
- *
- * Allows use of a mempolicy for, e.g., multiple allocations with a single
- * policy lookup, even if the policy needs/has extra ref on lookup.
- * shmem_readahead needs this.
- */
-struct mempolicy *__mpol_cond_copy(struct mempolicy *tompol,
-						struct mempolicy *frompol)
-{
-	if (!mpol_needs_cond_ref(frompol))
-		return frompol;
-
-	*tompol = *frompol;
-	tompol->flags &= ~MPOL_F_SHARED;	/* copy doesn't need unref */
-	__mpol_put(frompol);
-	return tompol;
-}
-
 /* Slow path of a mempolicy comparison */
 bool __mpol_equal(struct mempolicy *a, struct mempolicy *b)
 {