[PATCH net 0/2] net: sparx5/lan969x: fix RX ring stall on frames from inactive ports

From
Daniel Machon <daniel.machon@microchip.com>
Date
2026-11-16 09:56:13
Also in
linux-arm-kernel, lkml
On Sparx5 and lan969x, a received frame whose source port does not map
to an active port is never consumed from the FDMA RX ring: the NAPI poll
stops on it, and finds the same DB again on every following poll.

Patch 1 fixes Sparx5, where the same skb grows on every poll until
skb_over_panic().

Patch 2 fixes lan969x, where RX stops on all ports.

The issue was reported by Zhang Hewei, and these patches replace his
series [1]. Tested on Sparx5 and lan969x.

[1] https://lore.kernel.org/netdev/tencent_D2451CD0D7B4B812CEBADB56DC722BC33406@qq.com/ (local)

Signed-off-by: Daniel Machon <daniel.machon@microchip.com>
---
Daniel Machon (2):
      net: sparx5: fix RX ring stall on frames from inactive ports
      net: lan969x: fix RX ring stall on frames from inactive ports

 drivers/net/ethernet/microchip/sparx5/lan969x/lan969x_fdma.c | 11 ++++++-----
 drivers/net/ethernet/microchip/sparx5/sparx5_fdma.c          | 12 +++++++++---
 2 files changed, 15 insertions(+), 8 deletions(-)
---
base-commit: aa40afa831ebfe45e40a23721711059f2ac584d4
change-id: 20261116-sparx5-rx-inactive-port-df606d3f9b1a

Best regards,
-- 
Daniel Machon [off-list ref]
Thread (3 messages) 3 messages, 1 author, last reply 11h ago
Keyboard shortcuts
hback out one level
jnext message in thread / next series-diff position
kprevious message in thread / previous series-diff position
ldrill in
Escclose help / fold thread tree
?toggle this help