[PATCH net-next 3/3] net: mdio: mdio-bcm-unimac: Add Clause 45 support

From
Florian Fainelli <florian.fainelli@broadcom.com>
Date
2026-11-13 21:16:27
Also in
lkml
Reply to
Florian Fainelli, 2026-11-13
Add Clause 45 read/write support to the UniMAC MDIO bus controller driver
by implementing the read_c45/write_c45 bus callbacks. Each access performs
the two-step C45 sequence (ADDR cycle followed by a READ/WRITE cycle) under
the bus lock and switches MDIO_CFG between C22 and C45 mode as needed;
MDIO_CFG is only written when the mode actually changes.

Also skip the BMSR workaround read in unimac_mdio_reset() for children
compatible with "ethernet-phy-ieee802.3-c45", since such PHYs are not
expected to respond to C22 accesses.

Note that providing read_c45/write_c45 also makes the MDIO core scan for
C45 PHYs at registration time, on addresses that are not masked and do not
already have a C22 device.

Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com>
Co-developed-by: Carlos Soto <redacted>
Signed-off-by: Carlos Soto <redacted>
Co-developed-by: Justin Chen <justin.chen@broadcom.com>
Signed-off-by: Justin Chen <justin.chen@broadcom.com>
---
 drivers/net/mdio/mdio-bcm-unimac.c | 105 +++++++++++++++++++++++++++--
 1 file changed, 98 insertions(+), 7 deletions(-)
diff --git a/drivers/net/mdio/mdio-bcm-unimac.c b/drivers/net/mdio/mdio-bcm-unimac.c
index 15a9880c3573..25f54ee754f9 100644
--- a/drivers/net/mdio/mdio-bcm-unimac.c
+++ b/drivers/net/mdio/mdio-bcm-unimac.c
@@ -24,10 +24,16 @@
 #define  MDIO_OP_SHIFT		26
 #define  MDIO_RD_C22		(2 << MDIO_OP_SHIFT)
 #define  MDIO_WR_C22		(1 << MDIO_OP_SHIFT)
+#define  MDIO_ADDR_C45		(0 << MDIO_OP_SHIFT)
+#define  MDIO_WR_C45		(1 << MDIO_OP_SHIFT)
+#define  MDIO_RD_C45		(3 << MDIO_OP_SHIFT)
 #define  MDIO_PMD_SHIFT		21
 #define  MDIO_PMD_MASK		0x1F
 #define  MDIO_REG_SHIFT		16
 #define  MDIO_REG_MASK		0x1F
+#define  MDIO_DEVAD_SHIFT	16
+#define  MDIO_DEVAD_MASK	GENMASK(20, 16)
+#define  MDIO_C45_REG_MASK	GENMASK(15, 0)
 
 #define MDIO_CFG		0x04
 #define  MDIO_C22		(1 << 0)
@@ -96,7 +102,43 @@ static int unimac_mdio_poll(void *wait_func_data)
 					MDIO_CMD);
 }
 
-static int unimac_mdio_read(struct mii_bus *bus, int phy_id, int reg)
+static u32 unimac_mdio_c45_devad(int devad)
+{
+	return ((u32)devad << MDIO_DEVAD_SHIFT) & MDIO_DEVAD_MASK;
+}
+
+static int unimac_mdio_addr_c45(struct unimac_mdio_priv *priv,
+				int phy_id, int devad, int reg)
+{
+	u32 cmd;
+
+	/* Prepare the addr c45 operation */
+	cmd = MDIO_ADDR_C45 | (phy_id << MDIO_PMD_SHIFT) |
+	      unimac_mdio_c45_devad(devad) | (reg & MDIO_C45_REG_MASK);
+	unimac_mdio_writel(priv, cmd, MDIO_CMD);
+
+	/* Start MDIO transaction */
+	unimac_mdio_start(priv);
+
+	return priv->wait_func(priv->wait_func_data);
+}
+
+static void unimac_mdio_set_clause(struct unimac_mdio_priv *priv, bool is_c45)
+{
+	u32 cfg = unimac_mdio_readl(priv, MDIO_CFG);
+	u32 new_cfg = cfg;
+
+	if (is_c45)
+		new_cfg &= ~MDIO_C22;
+	else
+		new_cfg |= MDIO_C22;
+
+	if (new_cfg != cfg)
+		unimac_mdio_writel(priv, new_cfg, MDIO_CFG);
+}
+
+static int unimac_mdio_do_read(struct mii_bus *bus, int phy_id, int devad,
+			       int reg, bool is_c45)
 {
 	struct unimac_mdio_priv *priv = bus->priv;
 	int ret;
@@ -107,8 +149,19 @@ static int unimac_mdio_read(struct mii_bus *bus, int phy_id, int reg)
 		return ret;
 
 	/* Prepare the read operation */
-	cmd = MDIO_RD_C22 | (phy_id << MDIO_PMD_SHIFT) |
-		(reg << MDIO_REG_SHIFT);
+	unimac_mdio_set_clause(priv, is_c45);
+	if (is_c45) {
+		ret = unimac_mdio_addr_c45(priv, phy_id, devad, reg);
+		if (ret)
+			goto out;
+
+		cmd = MDIO_RD_C45 | (phy_id << MDIO_PMD_SHIFT) |
+			unimac_mdio_c45_devad(devad) |
+			(reg & MDIO_C45_REG_MASK);
+	} else {
+		cmd = MDIO_RD_C22 | (phy_id << MDIO_PMD_SHIFT) |
+			(reg << MDIO_REG_SHIFT);
+	}
 	unimac_mdio_writel(priv, cmd, MDIO_CMD);
 
 	/* Start MDIO transaction */
@@ -136,8 +189,8 @@ static int unimac_mdio_read(struct mii_bus *bus, int phy_id, int reg)
 	return ret;
 }
 
-static int unimac_mdio_write(struct mii_bus *bus, int phy_id,
-			     int reg, u16 val)
+static int unimac_mdio_do_write(struct mii_bus *bus, int phy_id, int devad,
+				int reg, u16 val, bool is_c45)
 {
 	struct unimac_mdio_priv *priv = bus->priv;
 	u32 cmd;
@@ -148,18 +201,50 @@ static int unimac_mdio_write(struct mii_bus *bus, int phy_id,
 		return ret;
 
 	/* Prepare the write operation */
-	cmd = MDIO_WR_C22 | (phy_id << MDIO_PMD_SHIFT) |
-		(reg << MDIO_REG_SHIFT) | (0xffff & val);
+	unimac_mdio_set_clause(priv, is_c45);
+	if (is_c45) {
+		ret = unimac_mdio_addr_c45(priv, phy_id, devad, reg);
+		if (ret)
+			goto out;
+
+		cmd = MDIO_WR_C45 | (phy_id << MDIO_PMD_SHIFT) |
+			unimac_mdio_c45_devad(devad) | (0xffff & val);
+	} else {
+		cmd = MDIO_WR_C22 | (phy_id << MDIO_PMD_SHIFT) |
+			(reg << MDIO_REG_SHIFT) | (0xffff & val);
+	}
 	unimac_mdio_writel(priv, cmd, MDIO_CMD);
 
 	unimac_mdio_start(priv);
 
 	ret = priv->wait_func(priv->wait_func_data);
+out:
 	clk_disable_unprepare(priv->clk);
 
 	return ret;
 }
 
+static int unimac_mdio_read(struct mii_bus *bus, int phy_id, int reg)
+{
+	return unimac_mdio_do_read(bus, phy_id, 0, reg, false);
+}
+
+static int unimac_mdio_write(struct mii_bus *bus, int phy_id, int reg, u16 val)
+{
+	return unimac_mdio_do_write(bus, phy_id, 0, reg, val, false);
+}
+
+static int unimac_mdio_read_c45(struct mii_bus *bus, int addr, int dev, int reg)
+{
+	return unimac_mdio_do_read(bus, addr, dev, reg, true);
+}
+
+static int unimac_mdio_write_c45(struct mii_bus *bus, int addr, int dev,
+				 int reg, u16 val)
+{
+	return unimac_mdio_do_write(bus, addr, dev, reg, val, true);
+}
+
 /* Workaround for integrated BCM7xxx Gigabit PHYs which have a problem with
  * their internal MDIO management controller making them fail to successfully
  * be read from or written to for the first transaction.  We insert a dummy
@@ -190,6 +275,10 @@ static int unimac_mdio_reset(struct mii_bus *bus)
 			if (addr < 0)
 				continue;
 
+			if (of_device_is_compatible(child,
+						    "ethernet-phy-ieee802.3-c45"))
+				continue;
+
 			read_mask |= 1 << addr;
 		}
 	}
@@ -301,6 +390,8 @@ static int unimac_mdio_probe(struct platform_device *pdev)
 	bus->parent = &pdev->dev;
 	bus->read = unimac_mdio_read;
 	bus->write = unimac_mdio_write;
+	bus->read_c45 = unimac_mdio_read_c45;
+	bus->write_c45 = unimac_mdio_write_c45;
 	bus->reset = unimac_mdio_reset;
 	snprintf(bus->id, MII_BUS_ID_SIZE, "%s-%d", pdev->name, pdev->id);
 
-- 
2.34.1
Thread (13 messages) 13 messages, 4 authors, last reply 3h ago
Keyboard shortcuts
hback out one level
jnext message in thread / next series-diff position
kprevious message in thread / previous series-diff position
ldrill in
Escclose help / fold thread tree
?toggle this help