On Tue, Nov 03, 2026 at 04:37:12PM +0000, Lucas Tanure wrote:
The delay code reads phy-mode as the list of delays this glue has to
add, falls back to a 2ns transmit delay when no property asks for one,
and takes the vendor delay properties. ethernet-controller.yaml says
the opposite: the PHY adds the 2ns delays, and the MAC properties only
hold small fine tuning added on top. Every board in the tree depends on
the old reading, so it stays as it is.
No T7 board uses this glue yet, so the T7 gets a path of its own that
follows the generic rules: the receive delay line is fine tuning in
200ps steps, and the transmit side, a quarter-period phase step, offers
none, so the transmit property is refused.
Assisted-by: LLM
Signed-off-by: Lucas Tanure <redacted>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Andrew