Thread (28 messages) 28 messages, 3 authors, 1d ago

[PATCH net 00/11] net: au1000: Bug fixes

flat view
WARM1d

From: Florian Fainelli <f.fainelli@gmail.com>
Date: 2026-10-27 22:31:54
Also in: lkml
Subsystem: ethernet phy library, networking drivers, the rest · Maintainers: Andrew Lunn, Heiner Kallweit, Andrew Lunn, "David S. Miller", Eric Dumazet, Jakub Kicinski, Paolo Abeni, Linus Torvalds

This patch series contains bug fixes that were found during code
inspection and also during fixing the open/close/open issue that was met
on the MTX-1 platform.

These patches were tested on a Meshcube MTX-1 board using targeted tests
to ensure the multicast and open/close/open bugs were fixed.

Florian Fainelli (11):
  net: au1000: recycle RX descriptors on allocation failure
  net: au1000: clear all-multicast mode when restoring hash filtering
  net: au1000: disconnect the PHY before freeing the MDIO bus
  net: au1000: report MDIO transaction timeouts
  net: au1000: serialize TX completion with packet submission
  net: au1000: assign a valid MAC address without platform data
  net: au1000: fix buffer descriptor free list insertion
  net: au1000: restore receive filtering after MAC initialization
  net: au1000: restore RX buffer addresses when restarting the MAC
  net: au1000: keep the MAC stopped until the PHY link is ready
  net: phy: smsc: wait for LAN83C183 power-down recovery

 drivers/net/ethernet/amd/au1000_eth.c | 74 ++++++++++++++++++++-------
 drivers/net/phy/Kconfig               |  2 +-
 drivers/net/phy/smsc.c                | 26 ++++++++++
 3 files changed, 83 insertions(+), 19 deletions(-)

-- 
2.53.0
Keyboard shortcuts
hback out one level
jnext message in thread
kprevious message in thread
ldrill in
Escclose help / fold thread tree
?toggle this help