Add an optional "sfdp" child node (compatible "jedec,sfdp") that
describes the SFDP as a read-only NVMEM provider via nvmem.yaml, so its
contents (e.g. a vendor EUI-48/EUI-64) can be read through NVMEM cells.
Reviewed-by: Linus Walleij <linusw@kernel.org>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Manikandan Muralidharan <manikandan.m@microchip.com>
---
.../bindings/mtd/jedec,spi-nor.yaml | 20 +++++++++++++++++++
1 file changed, 20 insertions(+)
diff --git a/Documentation/devicetree/bindings/mtd/jedec,spi-nor.yaml b/Documentation/devicetree/bindings/mtd/jedec,spi-nor.yaml
index 587af4968255..d7e659912b4a 100644
--- a/Documentation/devicetree/bindings/mtd/jedec,spi-nor.yaml
+++ b/Documentation/devicetree/bindings/mtd/jedec,spi-nor.yaml
@@ -103,6 +103,22 @@ properties:
spi-cpol: true
spi-cpha: true
+ sfdp:
+ $ref: /schemas/nvmem/nvmem.yaml#
+ unevaluatedProperties: false
+ description:
+ The Serial Flash Discoverable Parameters (SFDP) tables exposed as a
+ read-only NVMEM device. This allows standard or vendor-specific SFDP
+ data (for example a factory-programmed EUI-48/EUI-64 identifier) to be
+ consumed through NVMEM cells.
+
+ properties:
+ compatible:
+ const: jedec,sfdp
+
+ required:
+ - compatible
+
dependencies:
spi-cpol: [ spi-cpha ]
spi-cpha: [ spi-cpol ]
@@ -122,6 +138,10 @@ examples:
spi-max-frequency = <40000000>;
m25p,fast-read;
reset-gpios = <&gpio 12 GPIO_ACTIVE_LOW>;
+
+ sfdp {
+ compatible = "jedec,sfdp";
+ };
};
};
...--
2.43.0