[PATCH net v3 2/6] amt: reject a gateway Query or Data from 0.0.0.0 before a relay is learned

A gateway's amt_rcv() admits a Membership Query or Multicast Data message
when "saddr != remote_ip" is false.  remote_ip is 0 before discovery has
learned a relay (and is reset to 0 by amt_dev_open() and when discovery
gives up), so a packet whose source is 0.0.0.0 -- for example a
0.0.0.0 -> 255.255.255.255 broadcast delivered to the socket -- satisfies
0 != 0 and is accepted.  With the nonce freshly reset to 0, a spoofed
Query is then taken as genuine: it sets ready4/qi and the response MAC and
suppresses rediscovery until the discovery timeout, and a spoofed Data
message is injected the same way.

Reject both when no relay is learned: a 0 remote_ip must match nothing, so
guard the check with !remote_ip.  Discovery is unaffected -- Relay
Advertisements are validated against discovery_ip, not remote_ip.

Fixes: b9022b53adad ("amt: add control plane of amt interface")
Assisted-by: LLM
Signed-off-by: Omar Ramadan <redacted>
---
 drivers/net/amt.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/net/amt.c b/drivers/net/amt.c
index b284fa7..c3716ba 100644
--- a/drivers/net/amt.c
+++ b/drivers/net/amt.c

@@ -2858,7 +2858,7 @@ static int amt_rcv(struct sock *sk, struct sk_buff *skb)
 			}
 			goto out;
 		case AMT_MSG_MULTICAST_DATA:
-			if (saddr != remote_ip) {
+			if (!remote_ip || saddr != remote_ip) {
 				netdev_dbg(amt->dev, "Invalid Relay IP\n");
 				err = true;
 				goto drop;

@@ -2869,7 +2869,7 @@ static int amt_rcv(struct sock *sk, struct sk_buff *skb)
 			else
 				goto out;
 		case AMT_MSG_MEMBERSHIP_QUERY:
-			if (saddr != remote_ip) {
+			if (!remote_ip || saddr != remote_ip) {
 				netdev_dbg(amt->dev, "Invalid Relay IP\n");
 				err = true;
 				goto drop;

-- 
2.43.0