[PATCH net-next v16 09/13] ax88179_178a: Add Suspend/resume support for AX88179A/772D/279

@@ -684,6 +684,9 @@ static int ax88179_bind(struct usbnet *dev, struct usb_interface *intf)
 
 	dev->driver_priv = ax179_data;
 
+	ax179_data->resume = ax88179_resume;
+	ax179_data->suspend = ax88179_suspend;
+
 	ret = ax88179_read_cmd(dev, AX_ACCESS_MAC, AX_CHIP_STATUS,
 			       1, 1, &ax179_data->chip_version);
 	if (ret < 0)

@@ -1355,9 +1358,9 @@ static struct usb_driver ax88179_178a_driver = {
 	.name =		"ax88179_178a",
 	.id_table =	products,
 	.probe =	usbnet_probe,
-	.suspend =	ax88179_suspend,
-	.resume =	ax88179_resume,
-	.reset_resume =	ax88179_resume,
+	.suspend =	ax88179_suspend_wrapper,
+	.resume =	ax88179_resume_wrapper,
+	.reset_resume =	ax88179_resume_wrapper,
 	.disconnect =	ax88179_disconnect,
 	.supports_autosuspend = 1,
 	.disable_hub_initiated_lpm = 1,

@@ -479,3 +479,22 @@ int ax88179_set_mac_addr(struct net_device *net, void *p)
 	return 0;
 }
 
+int ax88179_suspend_wrapper(struct usb_interface *intf, pm_message_t message)
+{
+	struct usbnet *dev = usb_get_intfdata(intf);
+	struct ax88179_data *priv;
+
+	priv = dev->driver_priv;
+
+	return priv->suspend(intf, message);
+}
+
+int ax88179_resume_wrapper(struct usb_interface *intf)
+{
+	struct usbnet *dev = usb_get_intfdata(intf);
+	struct ax88179_data *priv;
+
+	priv = dev->driver_priv;
+	return priv->resume(intf);
+}
+

@@ -314,6 +314,8 @@ struct ax88179_data {
 	struct phy_device *phydev;
 	struct phylink *phylink;
 	struct phylink_config phylink_config;
+	int (*resume)(struct usb_interface *intf);
+	int (*suspend)(struct usb_interface *intf, pm_message_t message);
 };
 
 struct ax88179_int_data {

@@ -347,6 +349,8 @@ int ax88179_set_features(struct net_device *net, netdev_features_t features);
 void ax88179_get_mac_addr(struct usbnet *dev);
 int ax88179_change_mtu(struct net_device *net, int new_mtu);
 int ax88179_set_mac_addr(struct net_device *net, void *p);
+int ax88179_suspend_wrapper(struct usb_interface *intf, pm_message_t message);
+int ax88179_resume_wrapper(struct usb_interface *intf);
 
 extern const struct driver_info ax88179a_info;
 extern const struct driver_info ax88772d_info;

@@ -5,6 +5,8 @@
 #include <linux/if_vlan.h>
 #include "ax88179_lib.h"
 
+static int ax88179a_reset(struct usbnet *dev);
+
 #define AX88279_EEPROM_LEN			0x4000
 #define AX88179A_EEPROM_LEN			(32 * 20)
 

@@ -126,6 +128,62 @@ static void ax88179a_status(struct usbnet *dev, struct urb *urb)
 	phylink_mac_interrupt(data->phylink);
 }
 
+static int ax88179a_suspend(struct usb_interface *intf, pm_message_t message)
+{
+	struct usbnet *dev = usb_get_intfdata(intf);
+	struct ax88179_data *priv;
+	u8 tmp8 = 0;
+	u16 tmp16;
+	int ret;
+
+	priv = dev->driver_priv;
+	ax88179_set_pm_mode(dev, true);
+
+	if (netif_running(dev->net)) {
+		rtnl_lock();
+		phylink_suspend(priv->phylink, !!priv->wolopts);
+		rtnl_unlock();
+	}
+
+	ret = usbnet_suspend(intf, message);
+	if (ret) {
+		rtnl_lock();
+		phylink_resume(priv->phylink);
+		rtnl_unlock();
+		return ret;
+	}
+
+	/* Enable WoL */
+	if (priv->wolopts) {
+		ax88179_read_cmd(dev, AX_ACCESS_MAC, AX_MONITOR_MOD, 1, 1, &tmp8);
+		tmp8 &= ~(AX_MONITOR_MODE_RWLC | AX_MONITOR_MODE_RWMP);
+		if (priv->wolopts & WAKE_PHY)
+			tmp8 |= AX_MONITOR_MODE_RWLC;
+		if (priv->wolopts & WAKE_MAGIC)
+			tmp8 |= AX_MONITOR_MODE_RWMP;
+
+		ax88179_write_cmd(dev, AX_ACCESS_MAC, AX_MONITOR_MOD, 1, 1, &tmp8);
+
+		ax88179_read_cmd(dev, AX_ACCESS_MAC, AX_MEDIUM_STATUS_MODE, 2, 2, &tmp16);
+		tmp16 |= AX_MEDIUM_RECEIVE_EN;
+		ax88179_write_cmd(dev, AX_ACCESS_MAC, AX_MEDIUM_STATUS_MODE, 2, 2, &tmp16);
+
+		if (priv->chip_version == AX_VERSION_AX88279)
+			ax88179_write_cmd(dev, AX88179A_WAKEUP_SETTING, 8,
+					  EPHY_LOW_POWER_EN | S5_WOL_EN
+					  | S5_WOL_LOW_POWER | 0x8000, 0, NULL);
+		else
+			ax88179_write_cmd(dev, AX88179A_WAKEUP_SETTING, 0,
+					  EPHY_LOW_POWER_EN, 0, NULL);
+
+	} else if (priv->chip_version == AX_VERSION_AX88279) {
+		ax88179_write_cmd(dev, AX88179A_WAKEUP_SETTING, 8, 0x8000, 0, NULL);
+	}
+
+	ax88179_set_pm_mode(dev, false);
+	return 0;
+}
+
 static int ax88179a_auto_detach(struct usbnet *dev)
 {
 	u16 tmp16;

@@ -135,6 +193,47 @@ static int ax88179a_auto_detach(struct usbnet *dev)
 	return 0;
 }
 
+static int ax88179a_resume(struct usb_interface *intf)
+{
+	struct usbnet *dev = usb_get_intfdata(intf);
+	struct ax88179_data *ax179_data;
+	u8 reg8 = 0;
+	int ret;
+
+	ax179_data = dev->driver_priv;
+	ax88179_set_pm_mode(dev, true);
+
+	ret = ax88179_read_cmd(dev, AX88179A_PHY_POWER, 0, 0, 1, &reg8);
+	if (ret < 0) {
+		ax88179_set_pm_mode(dev, false);
+		return ret;
+	}
+	if (!(reg8 & AX_PHY_POWER)) {
+		reg8 = AX_PHY_POWER;
+		ax88179_write_cmd(dev, AX88179A_PHY_POWER, 0, 0, 1, &reg8);
+		msleep(250);
+	}
+	ax88179_write_cmd(dev, AX_FW_MODE, AX_FW_MODE_179A, 0, 0, NULL);
+
+	/* Now, that AX_FW_MODE_179A is enabled, the PHY needs a power-cycle.
+	 * PHY-power is re-enabled in ax88179a_reset()
+	 */
+	ax88179_write_u8(dev, AX88179A_PHY_POWER, 0, 0, 0);
+	msleep(250);
+
+	ax88179a_reset(dev);
+
+	if (netif_running(dev->net)) {
+		rtnl_lock();
+		phylink_resume(ax179_data->phylink);
+		rtnl_unlock();
+	}
+
+	ax88179_set_pm_mode(dev, false);
+
+	return usbnet_resume(intf);
+}
+
 static void ax88179a_bulkin_config(struct usbnet *dev, u8 link_sts, u8 speed, bool full_duplex)
 {
 	struct ax88179_data *ax179_data = dev->driver_priv;

@@ -737,6 +836,9 @@ static int ax88179a_bind(struct usbnet *dev, struct usb_interface *intf)
 		ax179_data->eeprom_wen = 0;
 	}
 
+	ax179_data->resume = ax88179a_resume;
+	ax179_data->suspend = ax88179a_suspend;
+
 	dev->net->netdev_ops = &ax88179a_netdev_ops;
 	dev->net->ethtool_ops = &ax88179a_ethtool_ops;
 	dev->net->needed_headroom = 8;

@@ -784,6 +886,13 @@ static int ax88179a_bind(struct usbnet *dev, struct usb_interface *intf)
 	if (ret)
 		goto initphy_err;
 
+	/* Keep this interface runtime-PM active by taking a usage ref.
+	 * Prevents runtime suspend while bound and avoids resume paths
+	 * that could deadlock (autoresume under RTNL while USB PM lock
+	 * is held, phylink/MDIO wants RTNL).
+	 */
+	pm_runtime_get_noresume(&intf->dev);
+
 	return 0;
 
 initphy_err:

@@ -1097,7 +1206,11 @@ static int ax88179a_reset(struct usbnet *dev)
 	/* Ensure EEE state is off, consistent with phylink setup */
 	ax88179_write_cmd(dev, AX_GPHY_CTL, AX_GPHY_EEE_CTRL, false, 0, NULL);
 
-	phylink_start(ax179_data->phylink);
+	/* ax88179a_reset() may also be called from resume context,
+	 * phylink_resume() will start phylink, then.
+	 */
+	if (!ax179_data->in_pm)
+		phylink_start(ax179_data->phylink);
 
 	return 0;
 }