Re: [PATCH v5 06/23] clk: starfive: Add JHB100 System-0 clock generator driver
flat view
From: Brian Masney <hidden>
Date: 2026-10-02 18:51:53
Also in:
linux-clk, linux-devicetree, linux-hardening, linux-riscv, lkml
Hi Changhuang,
quoted hunk ↗ jump to hunk
Add support for JHB100 System-0 clock generator (SYS0CRG). Signed-off-by: Changhuang Liang <changhuang.liang@starfivetech.com>diff --git a/MAINTAINERS b/MAINTAINERS index 4f72b4ac27ee..a0e5b4df96aa 100644 --- a/MAINTAINERS +++ b/MAINTAINERS@@ -26097,6 +26097,13 @@ S: Supported F: Documentation/devicetree/bindings/phy/starfive,jh7110-dphy-rx.yaml F: drivers/phy/starfive/phy-jh7110-dphy-rx.c +STARFIVE JHB100 CLOCK DRIVERS +M: Changhuang Liang <changhuang.liang@starfivetech.com> +S: Supported +F: Documentation/devicetree/bindings/clock/starfive,jhb1*.yaml +F: drivers/clk/starfive/clk-starfive-jhb1* +F: include/dt-bindings/clock/starfive,jhb1*.h
The spacing after the : doesn't line up with the other sections. It looks like this is using spaces instead of a tab. Brian -- Brian Masney [off-list ref]