[PATCH v2 5/5] ARM: dts: axis: artpec6: add more blank lines
flat view
COOLING10d
From: Henrik Grimler <hidden>
Date: 2026-10-02 09:50:02
Also in:
linux-devicetree, lkml
Subsystem:
arm/artpec machine support, the rest · Maintainers:
Jesper Nilsson, Lars Persson, Linus Torvalds
The status property, and each child node, should preferably have empty lines before them to increase readability. dt-check-style in strict mode reports this type of issue as: axis/artpec6.dtsi:186: [required-blank-lines] "status" must be preceded by a blank line Fix all occurences. Signed-off-by: Henrik Grimler <redacted> --- arch/arm/boot/dts/axis/artpec6-devboard.dts | 1 + arch/arm/boot/dts/axis/artpec6.dtsi | 14 ++++++++++++++ 2 files changed, 15 insertions(+)
diff --git a/arch/arm/boot/dts/axis/artpec6-devboard.dts b/arch/arm/boot/dts/axis/artpec6-devboard.dts
index 9a91f9758442..55fdd610d3ed 100644
--- a/arch/arm/boot/dts/axis/artpec6-devboard.dts
+++ b/arch/arm/boot/dts/axis/artpec6-devboard.dts@@ -55,6 +55,7 @@ mdio { compatible = "snps,dwmac-mdio"; #address-cells = <0x1>; #size-cells = <0x0>; + phy1: phy@0 { device_type = "ethernet-phy"; compatible = "ethernet-phy-ieee802.3-c22";
diff --git a/arch/arm/boot/dts/axis/artpec6.dtsi b/arch/arm/boot/dts/axis/artpec6.dtsi
index 6e69cde0a609..c9f671fd685a 100644
--- a/arch/arm/boot/dts/axis/artpec6.dtsi
+++ b/arch/arm/boot/dts/axis/artpec6.dtsi@@ -120,6 +120,7 @@ timer@faf00600 { reg = <0xfaf00600 0x20>; interrupts = <GIC_PPI 13 0xf04>; clocks = <&clkctrl ARTPEC6_CLK_CPU_PERIPH>; + status = "disabled"; };
@@ -181,6 +182,7 @@ pcie: pcie@f8050000 { <0 0 0 3 &intc GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>, <0 0 0 4 &intc GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>; axis,syscon-pcie = <&syscon>; + status = "disabled"; };
@@ -195,6 +197,7 @@ pcie_ep: pcie-ep@f8050000 { num-ob-windows = <2>; num-lanes = <2>; axis,syscon-pcie = <&syscon>; + status = "disabled"; };
@@ -207,16 +210,19 @@ pinctrl_uart0: uart0grp { groups = "uart0grp2"; bias-pull-up; }; + pinctrl_uart1: uart1grp { function = "uart1"; groups = "uart1grp0"; bias-pull-up; }; + pinctrl_uart2: uart2grp { function = "uart2"; groups = "uart2grp1"; bias-pull-up; }; + pinctrl_uart3: uart3grp { function = "uart3"; groups = "uart3grp0";
@@ -259,6 +265,7 @@ dma0: dma@f8019000 { dma-channels = <8>; dma-requests = <8>; }; + dma1: dma@f8019400 { compatible = "renesas,nbpfaxi64dmac8b16"; reg = <0xf8019400 0x400>;
@@ -338,8 +345,10 @@ uart0: serial@f8036000 { dmas = <&dma0 4 (NBPF_SLAVE_RQ_HIGH | NBPF_SLAVE_RQ_LEVEL)>, <&dma0 5 (NBPF_SLAVE_RQ_HIGH | NBPF_SLAVE_RQ_LEVEL)>; dma-names = "rx", "tx"; + status = "disabled"; }; + uart1: serial@f8037000 { compatible = "arm,pl011", "arm,primecell"; reg = <0xf8037000 0x1000>;
@@ -352,8 +361,10 @@ uart1: serial@f8037000 { dmas = <&dma0 6 (NBPF_SLAVE_RQ_HIGH | NBPF_SLAVE_RQ_LEVEL)>, <&dma0 7 (NBPF_SLAVE_RQ_HIGH | NBPF_SLAVE_RQ_LEVEL)>; dma-names = "rx", "tx"; + status = "disabled"; }; + uart2: serial@f8038000 { compatible = "arm,pl011", "arm,primecell"; reg = <0xf8038000 0x1000>;
@@ -366,8 +377,10 @@ uart2: serial@f8038000 { dmas = <&dma1 0 (NBPF_SLAVE_RQ_HIGH | NBPF_SLAVE_RQ_LEVEL)>, <&dma1 1 (NBPF_SLAVE_RQ_HIGH | NBPF_SLAVE_RQ_LEVEL)>; dma-names = "rx", "tx"; + status = "disabled"; }; + uart3: serial@f8039000 { compatible = "arm,pl011", "arm,primecell"; reg = <0xf8039000 0x1000>;
@@ -380,6 +393,7 @@ uart3: serial@f8039000 { dmas = <&dma1 2 (NBPF_SLAVE_RQ_HIGH | NBPF_SLAVE_RQ_LEVEL)>, <&dma1 3 (NBPF_SLAVE_RQ_HIGH | NBPF_SLAVE_RQ_LEVEL)>; dma-names = "rx", "tx"; + status = "disabled"; }; };
--
2.43.0