[PATCH net v13 4/4] net: phy: restore the interrupt when the generic bind cycle fails

When phy_attach_direct() binds the generic driver itself and the bind
fails, the PHY is left with polling in place of its interrupt.
phy_probe() has already replaced phydev->irq with PHY_POLL by then. The
unwind does not go through phy_detach(), so the restore there does not
run, and a later attach finds a PHY that can only be polled.

Found on a Keenetic KN-1012 while adding the restore in phy_detach(),
as the other way out of the same bind cycle.

Save the interrupt number on entry and put it back on the error path.
The bus table is not the right source here. The same label is reached
when a second attach of a PHY already attached through the generic
driver fails, and there the field is live. The table also misses a
PHY_MAC_INTERRUPT that a MAC wrote into phydev->irq.

Tested on the KN-1012 with a 6.18 distribution kernel and an injected
failure of the generic probe: phydev->irq reads 15 afterwards, and -1
with only the restore in phy_detach().

Fixes: 6d9f66ac7fec ("net: phy: Fix PHY module checks and NULL deref in phy_attach_direct()")
Assisted-by: LLM
Signed-off-by: Aleksei Sviridkin <redacted>
---

Notes:
    v13: the commit message says who binds the generic driver, and which
    second attach reaches the label. No code change.
    
    The Fixes: tag differs from patch 3 because 6d9f66ac7fec split this
    failure off the label that calls phy_detach(). The failure was injected
    with a debug-only module parameter, once for one MDIO address.

 drivers/net/phy/phy_device.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/drivers/net/phy/phy_device.c b/drivers/net/phy/phy_device.c
index a9c71a286118..8bfb154402ad 100644
--- a/drivers/net/phy/phy_device.c
+++ b/drivers/net/phy/phy_device.c

@@ -1755,6 +1755,7 @@ int phy_attach_direct(struct net_device *dev, struct phy_device *phydev,
 	struct mii_bus *bus = phydev->mdio.bus;
 	struct device *d = &phydev->mdio.dev;
 	struct module *ndev_owner = NULL;
+	int irq = phydev->irq;
 	int err;
 
 	/* For Ethernet device drivers that register their own MDIO bus, we

@@ -1896,6 +1897,7 @@ int phy_attach_direct(struct net_device *dev, struct phy_device *phydev,
 
 error_module_put:
 	module_put(d->driver->owner);
+	phydev->irq = irq;
 	phydev->is_genphy_driven = 0;
 	d->driver = NULL;
 error_put_device:

-- 
2.53.0