@@ -0,0 +1,427 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * SiTime SiT9531x firmware node property parsing
+ *
+ * Copyright (C) 2026 SiTime Corp.
+ * Author: Ali Rouhi <arouhi@sitime.com>
+ * Author: Oleg Zadorozhnyi <Oleg.Zadorozhnyi@devoxsoftware.com>
+ *
+ * Retrieves pin properties from Device Tree firmware nodes (or
+ * applies defaults when no firmware node exists).
+ */
+
+#include <linux/dev_printk.h>
+#include <linux/dpll.h>
+#include <linux/err.h>
+#include <linux/fwnode.h>
+#include <linux/property.h>
+#include <linux/slab.h>
+#include <linux/string.h>
+
+#include "core.h"
+#include "prop.h"
+
+/*
+ * sit9531x_input_pin_label - fill the package label for an input pin
+ *
+ * Split out so input-naming changes stay local to this helper.
+ */
+static void sit9531x_input_pin_label(struct sit9531x_dev *sitdev,
+ struct sit9531x_pin_props *props, u8 id)
+{
+ u8 pair = sit9531x_input_pair(id);
+
+ if (sitdev->ref[id].sig_mode == SIT9531X_MODE_DE)
+ snprintf(props->package_label,
+ sizeof(props->package_label), "IN%u", pair);
+ else
+ snprintf(props->package_label,
+ sizeof(props->package_label), "IN%u%c", pair,
+ sit9531x_input_is_n(id) ? 'N' : 'P');
+}
+
+/*
+ * sit9531x_prop_pin_package_label_set - generate package label
+ * @dir: pin direction
+ * @id: pin index
+ *
+ * Generates a package label string. Output pins are named "OUT0",
+ * "OUT1", ... Input pins are named after the physical pair and lane:
+ * "IN0P", "IN0N", "IN1P", ... for single-ended lanes, or "IN0",
+ * "IN1", ... when the pair is configured differential (the N lane is
+ * not registered in that case).
+ */
+static void
+sit9531x_prop_pin_package_label_set(struct sit9531x_dev *sitdev,
+ struct sit9531x_pin_props *props,
+ enum dpll_pin_direction dir, u8 id)
+{
+ /* The internal INTSYNC pin has a fixed label */
+ if (dir == DPLL_PIN_DIRECTION_INPUT &&
+ id == SIT9531X_INTSYNC_PIN_ID) {
+ strscpy(props->package_label, "INTSYNC",
+ sizeof(props->package_label));
+ props->dpll_props.package_label = props->package_label;
+ return;
+ }
+
+ /* The internal XO reference has a fixed label */
+ if (dir == DPLL_PIN_DIRECTION_INPUT && id == SIT9531X_MAX_INPUTS) {
+ strscpy(props->package_label, "XO",
+ sizeof(props->package_label));
+ props->dpll_props.package_label = props->package_label;
+ return;
+ }
+
+ /* The internal INTSYNC source (output) pin has a fixed label */
+ if (dir == DPLL_PIN_DIRECTION_OUTPUT &&
+ id == SIT9531X_INTSYNC_OUT_PIN_ID) {
+ strscpy(props->package_label, "SYNCOUT",
+ sizeof(props->package_label));
+ props->dpll_props.package_label = props->package_label;
+ return;
+ }
+
+ if (dir == DPLL_PIN_DIRECTION_INPUT)
+ sit9531x_input_pin_label(sitdev, props, id);
+ else
+ /*
+ * Name the chip pin, not the driver's index for it. The
+ * two differ on the variant whose outputs are bonded out
+ * from a subset of the twelve slots, and a package label
+ * that named the index would point at a pin that is not
+ * the one being driven.
+ */
+ snprintf(props->package_label, sizeof(props->package_label),
+ "OUT%u", sitdev->info->clkout_map[id]);
+
+ props->dpll_props.package_label = props->package_label;
+}
+
+/*
+ * sit9531x_prop_pin_fwnode_get - find firmware node for a pin
+ * @dir: pin direction
+ * @id: pin index
+ *
+ * Searches for input-pins/output-pins child nodes in DT, looking for a
+ * child whose "reg" property matches the pin. The binding describes reg
+ * as the hardware index, so an output is matched by the chip slot it
+ * drives rather than by the driver's index for it: on the variant where
+ * the two differ, a board describing the pin it wired would otherwise
+ * have its properties applied to a different one.
+ *
+ * Return: 0 on success, -ENOENT if no firmware node exists
+ */
+static int
+sit9531x_prop_pin_fwnode_get(struct sit9531x_dev *sitdev,
+ struct sit9531x_pin_props *props,
+ enum dpll_pin_direction dir, u8 id)
+{
+ struct fwnode_handle *pins_node, *pin_node;
+ const char *node_name;
+
+ if (dir == DPLL_PIN_DIRECTION_INPUT) {
+ node_name = "input-pins";
+ } else {
+ node_name = "output-pins";
+ if (id < sitdev->info->num_outputs)
+ id = sitdev->info->clkout_map[id];
+ }
+
+ pins_node = device_get_named_child_node(sitdev->dev, node_name);
+ if (!pins_node) {
+ dev_dbg(sitdev->dev, "'%s' sub-node is missing\n", node_name);
+ return -ENOENT;
+ }
+
+ /* Enumerate child pin nodes and find the requested one */
+ fwnode_for_each_child_node(pins_node, pin_node) {
+ u32 reg;
+
+ if (fwnode_property_read_u32(pin_node, "reg", ®))
+ continue;
+
+ if (id == reg)
+ break;
+ }
+
+ fwnode_handle_put(pins_node);
+
+ props->fwnode = pin_node;
+
+ dev_dbg(sitdev->dev, "Firmware node for %s %sfound\n",
+ props->package_label, pin_node ? "" : "NOT ");
+
+ return pin_node ? 0 : -ENOENT;
+}
+
+/*
+ * sit9531x_pin_props_get - get pin properties for a given pin
+ * @dir: pin direction (INPUT or OUTPUT)
+ * @index: pin index
+ *
+ * Allocates a pin properties structure, generates a package label,
+ * looks up the firmware node if available, and reads optional
+ * properties (label, connection-type, supported-frequencies-hz).
+ *
+ * Call sit9531x_pin_props_put() to free the returned structure.
+ *
+ * Return: pointer to pin properties on success, error pointer on error
+ */
+struct sit9531x_pin_props *
+sit9531x_pin_props_get(struct sit9531x_dev *sitdev,
+ enum dpll_pin_direction dir, u8 index)
+{
+ struct dpll_pin_frequency *ranges;
+ struct sit9531x_pin_props *props;
+ int i, j, num_freqs = 0, rc;
+ u64 *freqs = NULL;
+ const char *type;
+ u64 curr_freq;
+
+ props = kzalloc_obj(*props, GFP_KERNEL);
+ if (!props)
+ return ERR_PTR(-ENOMEM);
+
+ if (dir == DPLL_PIN_DIRECTION_INPUT &&
+ index == SIT9531X_INTSYNC_PIN_ID) {
+ /*
+ * INTSYNC destination pin: a PLL locks to the INTSYNC net as a
+ * reference, so it can be connected.
+ */
+ props->dpll_props.type = DPLL_PIN_TYPE_INT_OSCILLATOR;
+ props->dpll_props.capabilities =
+ DPLL_PIN_CAPABILITIES_STATE_CAN_CHANGE;
+ curr_freq = 0;
+ } else if (dir == DPLL_PIN_DIRECTION_OUTPUT &&
+ index == SIT9531X_INTSYNC_OUT_PIN_ID) {
+ /*
+ * INTSYNC source pin: a PLL drives the INTSYNC net. It can be
+ * connected/disconnected but carries no priority (driving the
+ * net is not a reference selection) and no frequency.
+ */
+ props->dpll_props.type = DPLL_PIN_TYPE_INT_OSCILLATOR;
+ props->dpll_props.capabilities =
+ DPLL_PIN_CAPABILITIES_STATE_CAN_CHANGE;
+ curr_freq = 0;
+ } else if (dir == DPLL_PIN_DIRECTION_INPUT &&
+ index == SIT9531X_MAX_INPUTS) {
+ /* The XO reference is fixed: no state or priority control. */
+ props->dpll_props.type = DPLL_PIN_TYPE_INT_OSCILLATOR;
+ props->dpll_props.capabilities = 0;
+ sitdev->ref[index].freq = sitdev->xtal_freq;
+ curr_freq = sitdev->xtal_freq;
+ } else if (dir == DPLL_PIN_DIRECTION_INPUT) {
+ props->dpll_props.type = DPLL_PIN_TYPE_EXT;
+ props->dpll_props.capabilities =
+ DPLL_PIN_CAPABILITIES_STATE_CAN_CHANGE;
+ curr_freq = sitdev->ref[index].freq;
+ } else {
+ /*
+ * A synthesized clock output is an external connection with
+ * no more specific meaning; a board that knows better says
+ * so through the pin's connection-type property below.
+ */
+ props->dpll_props.type = DPLL_PIN_TYPE_EXT;
+ props->dpll_props.capabilities =
+ DPLL_PIN_CAPABILITIES_STATE_CAN_CHANGE;
+ curr_freq = sitdev->out[index].freq;
+ }
+
+ /* Generate package label */
+ sit9531x_prop_pin_package_label_set(sitdev, props, dir, index);
+
+ /*
+ * Both INTSYNC pins are internal to the chip and have no board-level
+ * wiring, so they take no properties from the firmware node.
+ */
+ if (dir == DPLL_PIN_DIRECTION_INPUT &&
+ (index == SIT9531X_INTSYNC_PIN_ID ||
+ index == SIT9531X_MAX_INPUTS))
+ goto skip_fwnode_props;
+ if (dir == DPLL_PIN_DIRECTION_OUTPUT &&
+ index == SIT9531X_INTSYNC_OUT_PIN_ID)
+ goto skip_fwnode_props;
+
+ rc = sit9531x_prop_pin_fwnode_get(sitdev, props, dir, index);
+ if (rc)
+ goto skip_fwnode_props;
+
+ /* Look for "label" property -> board label */
+ fwnode_property_read_string(props->fwnode, "label",
+ &props->dpll_props.board_label);
+
+ /* Look for "connection-type" property -> pin type enum */
+ if (!fwnode_property_read_string(props->fwnode, "connection-type",
+ &type)) {
+ if (!strcmp(type, "ext"))
+ props->dpll_props.type = DPLL_PIN_TYPE_EXT;
+ else if (!strcmp(type, "gnss"))
+ props->dpll_props.type = DPLL_PIN_TYPE_GNSS;
+ else if (!strcmp(type, "int"))
+ props->dpll_props.type = DPLL_PIN_TYPE_INT_OSCILLATOR;
+ else if (!strcmp(type, "synce"))
+ props->dpll_props.type = DPLL_PIN_TYPE_SYNCE_ETH_PORT;
+ else if (!strcmp(type, "mux"))
+ props->dpll_props.type = DPLL_PIN_TYPE_MUX;
+ else
+ dev_warn(sitdev->dev,
+ "Unknown pin type '%s'\n", type);
+ }
+
+ num_freqs = fwnode_property_count_u64(props->fwnode,
+ "supported-frequencies-hz");
+ if (num_freqs <= 0) {
+ num_freqs = 0;
+ goto skip_fwnode_props;
+ }
+
+ freqs = kcalloc(num_freqs, sizeof(*freqs), GFP_KERNEL);
+ if (!freqs) {
+ rc = -ENOMEM;
+ goto err_alloc_freqs;
+ }
+
+ rc = fwnode_property_read_u64_array(props->fwnode,
+ "supported-frequencies-hz",
+ freqs, num_freqs);
+ if (rc) {
+ dev_warn(sitdev->dev,
+ "failed to parse supported-frequencies-hz for %s: %d\n",
+ props->package_label, rc);
+ goto err_alloc_ranges;
+ }
+
+ /*
+ * Seed an input's runtime ref->freq with the first DT-listed
+ * supported frequency: for an input the board lists the rate that is
+ * physically wired to it first. An output's current rate is what its
+ * divider produces, not an entry of the list it may be set to.
+ */
+ if (num_freqs > 0 && dir == DPLL_PIN_DIRECTION_INPUT &&
+ index != SIT9531X_MAX_INPUTS)
+ curr_freq = freqs[0];
+
+skip_fwnode_props:
+ /* Neither INTSYNC pin carries a frequency attribute */
+ if (dir == DPLL_PIN_DIRECTION_INPUT &&
+ index == SIT9531X_INTSYNC_PIN_ID)
+ return props;
+ if (dir == DPLL_PIN_DIRECTION_OUTPUT &&
+ index == SIT9531X_INTSYNC_OUT_PIN_ID)
+ return props;
+
+ /*
+ * Advertise only concrete values from firmware plus current runtime
+ * value. For outputs without a firmware list, publish one wide range as
+ * an explicit fallback because those pins do support frequency_set.
+ */
+ ranges = kcalloc(num_freqs + 2, sizeof(*ranges), GFP_KERNEL);
+ if (!ranges) {
+ rc = -ENOMEM;
+ goto err_alloc_ranges;
+ }
+
+ /*
+ * Publish the seeded rate only once the pin is certain to be built.
+ * The allocation above is the last thing that can fail, and a call
+ * that reports failure must not leave the device's cached rate
+ * changed behind it.
+ */
+ if (curr_freq) {
+ if (dir == DPLL_PIN_DIRECTION_INPUT)
+ sitdev->ref[index].freq = curr_freq;
+ else
+ sitdev->out[index].freq = curr_freq;
+ }
+
+ j = 0;
+
+ /* Current frequency first, when known. */
+ if (curr_freq) {
+ struct dpll_pin_frequency f = DPLL_PIN_FREQUENCY(curr_freq);
+
+ ranges[j++] = f;
+ }
+
+ for (i = 0; i < num_freqs; i++) {
+ struct dpll_pin_frequency freq = DPLL_PIN_FREQUENCY(freqs[i]);
+
+ if (freqs[i] == curr_freq)
+ continue;
+ ranges[j++] = freq;
+ }
+
+ if (dir == DPLL_PIN_DIRECTION_OUTPUT && num_freqs == 0) {
+ ranges[j].min = 1;
+ ranges[j].max = 1000000000ULL; /* 1 GHz */
+ j++;
+ }
+
+ if (j > 0) {
+ props->dpll_props.freq_supported = ranges;
+ props->dpll_props.freq_supported_num = j;
+ } else {
+ kfree(ranges);
+ props->dpll_props.freq_supported = NULL;
+ props->dpll_props.freq_supported_num = 0;
+ }
+
+ kfree(freqs);
+
+ return props;
+
+err_alloc_ranges:
+ kfree(freqs);
+err_alloc_freqs:
+ fwnode_handle_put(props->fwnode);
+ kfree(props);
+
+ return ERR_PTR(rc);
+}
+
+/*
+ * sit9531x_pin_props_put - release pin properties
+ * @props: pin properties to free
+ */
+void sit9531x_pin_props_put(struct sit9531x_pin_props *props)
+{
+ kfree(props->dpll_props.freq_supported);
+
+ if (props->fwnode)
+ fwnode_handle_put(props->fwnode);
+
+ kfree(props);
+}
+
+/*
+ * sit9531x_prop_dpll_type_get - get DPLL channel type from firmware
+ * @index: DPLL channel index (0-3)
+ *
+ * Reads the "dpll-types" string array property from the firmware node
+ * and returns the corresponding DPLL type enum.
+ *
+ * Return: DPLL type for the given channel (default: DPLL_TYPE_PPS)
+ */
+enum dpll_type
+sit9531x_prop_dpll_type_get(struct sit9531x_dev *sitdev, u8 index)
+{
+ const char *types[SIT9531X_NUM_PLLS];
+ int count;
+
+ count = device_property_read_string_array(sitdev->dev, "dpll-types",
+ types, ARRAY_SIZE(types));
+
+ if (index >= count)
+ return DPLL_TYPE_PPS;
+
+ if (!strcmp(types[index], "pps"))
+ return DPLL_TYPE_PPS;
+ else if (!strcmp(types[index], "eec"))
+ return DPLL_TYPE_EEC;
+
+ dev_warn(sitdev->dev, "Unknown DPLL type '%s', using default\n",
+ types[index]);
+
+ return DPLL_TYPE_PPS;
+}