[next-next PATCH v2 0/2] eth: fbnic: Update BMC MAC address handling

Update the handling of BMC MAC addresses on fbnic, and in the process also
address several issues identified with the changes. This patch series
consists of 2 patches.

The first patch addresses issues found in the bmc_present and
bmc_tcam_reinit handling. It started out addressing the fact that present
w/o a MAC address was flagged as an invalid message. However, we ended up
also addressing a potential race in that setting bmc_present and
need_bmc_tcam_reinit could potentially race against the bmc_rpc_check. To
address that the bit flags were moved to a state bitmap and are now handled
via the test_and_clear_bit and assign_bit operations.

The second patch cleans up the BMC MAC addresses in the TCAMs if the BMC
opts to disable the channel and the FW notifies us of the BMC removal. By
doing this we can terminate the now defunct paths through our NIC data path
to the BMC. Similarly with this a potential race was found due to recent
changes that had moved the handling for the TCAMs out of the RTNL mutex and
into the netdev instance lock. To maintain sync additional locking was
added.

---

Alexander Duyck (2):
      fbnic: Rework the BMC state pulled from the capabilities message
      fbnic: Remove BMC routing rules when the BMC channel is disabled


 drivers/net/ethernet/meta/fbnic/fbnic.h     |   7 +-
 drivers/net/ethernet/meta/fbnic/fbnic_fw.c  |  78 ++++++++-----
 drivers/net/ethernet/meta/fbnic/fbnic_fw.h  |  19 ++-
 drivers/net/ethernet/meta/fbnic/fbnic_rpc.c | 121 ++++++++++++++++++--
 4 files changed, 179 insertions(+), 46 deletions(-)

--