Re: [net-next,PATCH v1] enetc: Increase eMDIO MDC rate to 1.2 MHz
flat view
From: Andrew Lunn <andrew@lunn.ch>
Date: 2026-09-24 02:21:46
Also in:
imx, lkml
If the property is absent, you should configure the standard 2.5MHz rate by default, instead of 1.2MHz.
Agreed. 802.3 says all devices on the bus should support 2.5Mhz. So i
see no real risk increasing it to whatever the hardware can do close,
but less than that.
Andrew
---
pw-bot: cr