Re: [PATCH net v9 0/4] net: phy: keep a PHY interrupt across a generic bind cycle

Andrew, please don't spend time on v9. A v10 follows with one code
change.

The store in phy_detach() moves inside the generic-driver branch. As
posted it runs on every detach, so it also takes the value from the
drivers you listed that set PHY_MAC_INTERRUPT in phydev->irq alone,
which is what you said genphy should not touch.

There is a second case for the same fix. After a failed request
phy_request_interrupt() leaves PHY_POLL in phydev->irq while the bus
table still holds the number that failed, so an unconditional restore
hands that number back on the next cycle.

pw-bot: cr