Thread (4 messages) 4 messages, 3 authors, 11d ago

[PATCH net] ice: detach the VF representor when ice_start_vfs() fails

flat view
COOLING11d

From: Linkui Xiao <hidden>
Date: 2026-09-21 03:17:02
Also in: intel-wired-lan, lkml, stable
Subsystem: intel ethernet drivers, networking drivers, the rest · Maintainers: Tony Nguyen, Przemek Kitszel, Andrew Lunn, "David S. Miller", Eric Dumazet, Jakub Kicinski, Paolo Abeni, Linus Torvalds

From: Linkui Xiao <redacted>

ice_start_vfs() attaches every VF it brings up to the eswitch with
ice_eswitch_attach_vf(), but the teardown path only undoes the queue
mappings and the VF VSI. Nothing calls ice_eswitch_detach_vf() for the
VFs that were attached before the failure, and the caller, ice_ena_vfs(),
goes straight to ice_free_vf_entries(), which drops its reference to
every VF.

The port representors created for those VFs therefore outlive the
failed VF creation:

  - the representor netdev stays registered and its devlink port stays
    registered too. That port is embedded in struct ice_vf, so it ends
    up pointing into the memory that ice_sriov_free_vf() releases;

  - repr->vf keeps pointing at the freed struct ice_vf, and repr->src_vsi
    at the VF VSI that ice_vf_vsi_release() tore down. The leftover
    netdev is still visible to the user, so even a plain
    "ip -s link show" of it reaches ice_repr_get_stats64(), which calls
    repr->ops.ready() -> ice_check_vf_ready_for_cfg(repr->vf) and then
    reads repr->src_vsi through ice_update_eth_stats();

  - the virtchnl ops of that VF, which ice_repr_add_vf() replaced with
    ice_virtchnl_set_repr_ops(), are never handed back to
    ice_virtchnl_set_dflt_ops();

  - pf->eswitch.reprs never becomes empty, so ice_eswitch_detach() never
    calls ice_eswitch_disable_switchdev(). pf->eswitch.is_running stays
    true, with the bridge offloads and the devlink rate topology still
    up, and ice_eswitch_release_env() is skipped, so the uplink VSI is
    left in the switchdev configuration that ice_eswitch_setup_env()
    gave it.

Detach the representor in the teardown loop the way ice_free_vfs() does,
ahead of ice_vf_vsi_release(), because ice_repr_rem_vf() and
ice_eswitch_release_repr() both need repr->src_vsi to still be valid.
Every VF the teardown loop walks completed ice_eswitch_attach_vf()
successfully, and ice_eswitch_detach_vf() already returns early for a VF
without a representor, so no extra condition is needed.

Fixes: fff292b47ac1 ("ice: add VF representors one by one")
Cc: stable@vger.kernel.org
Signed-off-by: Linkui Xiao <redacted>
---
 drivers/net/ethernet/intel/ice/ice_sriov.c | 1 +
 1 file changed, 1 insertion(+)
diff --git a/drivers/net/ethernet/intel/ice/ice_sriov.c b/drivers/net/ethernet/intel/ice/ice_sriov.c
index e04de0215596..1b563aba3bbd 100644
--- a/drivers/net/ethernet/intel/ice/ice_sriov.c
+++ b/drivers/net/ethernet/intel/ice/ice_sriov.c
@@ -508,6 +508,7 @@ static int ice_start_vfs(struct ice_pf *pf)
 		if (it_cnt == 0)
 			break;
 
+		ice_eswitch_detach_vf(pf, vf);
 		ice_dis_vf_mappings(vf);
 		ice_vf_vsi_release(vf);
 		it_cnt--;
-- 
2.25.1
Keyboard shortcuts
hback out one level
jnext message in thread
kprevious message in thread
ldrill in
Escclose help / fold thread tree
?toggle this help