[PATCH net-next v8] net: qualcomm: rmnet: require CAP_NET_ADMIN in the real device netns for config ops

An rmnet device may be created with its real device in a different
netns than the rmnet device itself (rmnet_newlink() resolves it in
link_net), and the config paths below only check CAP_NET_ADMIN against
dev_net(dev), while mutating rmnet port state attached to the real
device:

- rmnet_changelink() rewrites the endpoint mux table and
  port->data_format and, via rmnet_vnd_update_dev_mtu(), can shrink the
  MTU of the rmnet endpoint netdevs.
- rmnet_add_bridge() and rmnet_del_bridge(), reachable via
  ndo_add_slave/ndo_del_slave through RTM_SETLINK IFLA_MASTER, flip
  port->rmnet_mode and port->bridge_ep on the real device's port; with
  bridge_ep pointing at a caller-owned device, rmnet_rx_handler() then
  forwards real-device ingress frames to it.
- rmnet_set_coalesce() rewrites the port aggregation parameters via
  ETHTOOL_SCOALESCE (ioctl) or ETHTOOL_MSG_COALESCE_SET (netlink),
  whose capability checks likewise only cover dev's netns.

A caller privileged only in the rmnet device's netns can therefore
rewrite the shared cellular data-path state owned by another netns, and
steer its ingress traffic.

Gate the rtnl paths with rtnl_dev_link_net_capable(), matching the
"require CAP_NET_ADMIN in the device netns for changelink" series
(vxlan/geneve, CVE-2026-68432), and gate the ethtool setter with
ns_capable() in the real device netns, mirroring the check dev_ethtool()
already applies to dev's netns.  Report the new rejections through
extack where one is available.

The gates cover the configuration paths only.  Teardown (RTM_DELLINK
reaching rmnet_dellink(), and rmnet_config_notify_cb() unregistering
the bridge when the slave device is deleted) is intentionally left
ungated: link deletion is normal netdev lifecycle behaviour, and the
changelink series this matches (vxlan/geneve, CVE-2026-68432) gated
only the configuration paths.

Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Abdifatah Suruur <redacted>

---
v8:
- drop the Fixes and stable tags, per Jakub Kicinski
- drop the explanatory comments added next to the gates, per Jakub
  Kicinski
- shorten the extack messages to "request modifies device in another
  netns", per Jakub Kicinski
v7:
- state explicitly in the commit message that the dellink and notifier
  teardown paths are out of scope, per the Sashiko review
- drop the master-moved-into-the-real-device-netns rationale from the
  rmnet_add_bridge() comment: on the add path do_set_master() resolves
  the master in the slave's netns, so the rationale only applies to
  rmnet_del_bridge(), where the master comes from
  netdev_master_upper_dev_get()
- use the netdev comment style in rmnet_set_coalesce(), per the
  Sashiko review
v6:
- gate rmnet_add_bridge() and rmnet_del_bridge() on slave_dev, the
  RTM_SETLINK target the caller was actually authorized against,
  instead of rmnet_dev: a master moved into the real device's netns
  short-circuits rtnl_dev_link_net_capable() through the net_eq()
  check, so a caller only privileged in the slave's netns could
  otherwise attach or clear the bridge state of the real device's
  port
- add the Fixes tag for the commit that introduced rmnet_set_coalesce()
v5:
- also gate rmnet_set_coalesce(), the ethtool setter that rewrites the
  port aggregation parameters of the real device's port, per the
  Sashiko review
- report the new capability rejections through extack where available
v4:
- use the netdev comment style, per Subash Abhinov Kasiviswanathan
v3:
- cover rmnet_add_bridge() and rmnet_del_bridge() with the same gate;
  they mutate the same real-device port state via ndo_add_slave/
  ndo_del_slave and have no capability check of their own
- correct the impact wording: rmnet_vnd_update_dev_mtu() only reads
  real_dev->mtu; the MTU store lands on the rmnet endpoint netdevs via
  rmnet_vnd_change_mtu(), not on the real device
v2:
- drop Reported-by: (implied for the author), per Jakub Kicinski
---
 .../ethernet/qualcomm/rmnet/rmnet_config.c    | 21 ++++++++++++++++++-
 .../net/ethernet/qualcomm/rmnet/rmnet_vnd.c   | 11 +++++++++-
 2 files changed, 30 insertions(+), 2 deletions(-)

diff --git a/drivers/net/ethernet/qualcomm/rmnet/rmnet_config.c b/drivers/net/ethernet/qualcomm/rmnet/rmnet_config.c
index bed6f63facf25..8bf385ab44a90 100644
--- a/drivers/net/ethernet/qualcomm/rmnet/rmnet_config.c
+++ b/drivers/net/ethernet/qualcomm/rmnet/rmnet_config.c

@@ -312,6 +312,12 @@ static int rmnet_changelink(struct net_device *dev, struct nlattr *tb[],
 	if (!rmnet_is_real_dev_registered(real_dev))
 		return -ENODEV;
 
+	if (!rtnl_dev_link_net_capable(dev, dev_net(real_dev))) {
+		NL_SET_ERR_MSG_MOD(extack,
+				   "request modifies device in another netns");
+		return -EPERM;
+	}
+
 	port = rmnet_get_port_rtnl(real_dev);
 
 	if (data[IFLA_RMNET_MUX_ID]) {

@@ -441,6 +447,12 @@ int rmnet_add_bridge(struct net_device *rmnet_dev,
 	struct rmnet_port *port, *slave_port;
 	int err;
 
+	if (!rtnl_dev_link_net_capable(slave_dev, dev_net(real_dev))) {
+		NL_SET_ERR_MSG_MOD(extack,
+				   "request modifies device in another netns");
+		return -EPERM;
+	}
+
 	port = rmnet_get_port_rtnl(real_dev);
 
 	/* If there is more than one rmnet dev attached, its probably being

@@ -489,7 +501,14 @@ int rmnet_add_bridge(struct net_device *rmnet_dev,
 int rmnet_del_bridge(struct net_device *rmnet_dev,
 		     struct net_device *slave_dev)
 {
-	struct rmnet_port *port = rmnet_get_port_rtnl(slave_dev);
+	struct rmnet_priv *priv = netdev_priv(rmnet_dev);
+	struct net_device *real_dev = priv->real_dev;
+	struct rmnet_port *port;
+
+	if (!rtnl_dev_link_net_capable(slave_dev, dev_net(real_dev)))
+		return -EPERM;
+
+	port = rmnet_get_port_rtnl(slave_dev);
 
 	rmnet_unregister_bridge(port);
 

diff --git a/drivers/net/ethernet/qualcomm/rmnet/rmnet_vnd.c b/drivers/net/ethernet/qualcomm/rmnet/rmnet_vnd.c
index 4f0ddcedfa979..53802b485a813 100644
--- a/drivers/net/ethernet/qualcomm/rmnet/rmnet_vnd.c
+++ b/drivers/net/ethernet/qualcomm/rmnet/rmnet_vnd.c

@@ -4,9 +4,11 @@
  * RMNET Data virtual network driver
  */
 
+#include <linux/capability.h>
 #include <linux/etherdevice.h>
 #include <linux/ethtool.h>
 #include <linux/if_arp.h>
+#include <linux/netlink.h>
 #include <net/pkt_sched.h>
 #include "rmnet_config.h"
 #include "rmnet_handlers.h"

@@ -240,9 +242,16 @@ static int rmnet_set_coalesce(struct net_device *dev,
 			      struct netlink_ext_ack *extack)
 {
 	struct rmnet_priv *priv = netdev_priv(dev);
+	struct net_device *real_dev = priv->real_dev;
 	struct rmnet_port *port;
 
-	port = rmnet_get_port_rtnl(priv->real_dev);
+	if (!ns_capable(dev_net(real_dev)->user_ns, CAP_NET_ADMIN)) {
+		NL_SET_ERR_MSG_MOD(extack,
+				   "request modifies device in another netns");
+		return -EPERM;
+	}
+
+	port = rmnet_get_port_rtnl(real_dev);
 
 	if (kernel_coal->tx_aggr_max_frames < 1 || kernel_coal->tx_aggr_max_frames > 64)
 		return -EINVAL;

-- 
2.53.0