[PATCH net-next v8 2/3] dt-bindings: net: wiznet,w5100: add link status interrupt
From: Arthur Crepin Leblond <hidden>
Date: 2026-09-15 08:06:27
Also in:
linux-devicetree, lkml
Subsystem:
networking drivers, open firmware and flattened device tree bindings, the rest · Maintainers:
Andrew Lunn, "David S. Miller", Eric Dumazet, Jakub Kicinski, Paolo Abeni, Rob Herring, Krzysztof Kozlowski, Conor Dooley, Linus Torvalds
Add an optional link status interrupt which can be connected to the LINKLED pin on the device to detect link status changes. This second interrupt is only supported on wiznet,w5500. Signed-off-by: Arthur Crepin Leblond <redacted> --- v8: - Remove Krzysztof Kozlowski reviewed-by tag after Sashiko review changes - Make the interrupts property conditional v7: - No changes v6: - Fix DT error: use minItems - Remove conditional properties v5: - Make the DT interrupts property dynamic from the compatible one - Fix DT bindings errors v4: - Update interrupts in DT bindings v3: - Fix DT binding errors v2: - Convert device tree binding to YAML --- .../devicetree/bindings/net/wiznet,w5100.yaml | 38 ++++++++++++++++++---- 1 file changed, 31 insertions(+), 7 deletions(-)
diff --git a/Documentation/devicetree/bindings/net/wiznet,w5100.yaml b/Documentation/devicetree/bindings/net/wiznet,w5100.yaml
index 25098308eb6e..da03f4e07f29 100644
--- a/Documentation/devicetree/bindings/net/wiznet,w5100.yaml
+++ b/Documentation/devicetree/bindings/net/wiznet,w5100.yaml@@ -12,10 +12,6 @@ maintainers: description: | This is a standalone 10/100 MBit Ethernet controller with SPI interface. -allOf: - - $ref: /schemas/net/ethernet-controller.yaml# - - $ref: /schemas/spi/spi-peripheral-props.yaml# - properties: compatible: enum:
@@ -24,8 +20,11 @@ properties: - wiznet,w5500 interrupts: - maxItems: 1 - description: Main interrupt (INT pin on the device). + description: + The main interrupt (INT pin) is mandatory on all devices. The w5500 + additionally supports an optional second interrupt for link status changes + (LINKLED pin). If it is not specified, link state changes will not be + reported. reg: maxItems: 1
@@ -42,6 +41,30 @@ required: - reg - interrupts +allOf: + - $ref: /schemas/net/ethernet-controller.yaml# + - $ref: /schemas/spi/spi-peripheral-props.yaml# + - if: + properties: + compatible: + contains: + enum: + - wiznet,w5500 + then: + properties: + interrupts: + minItems: 1 + items: + - description: Main interrupt (INT pin on the device). + - description: + Optional interrupt for link status changes (LINKLED pin on + w5500). + else: + properties: + interrupts: + maxItems: 1 + description: Main interrupt (INT pin on the device). + unevaluatedProperties: false examples:
@@ -60,7 +83,8 @@ examples: pinctrl-names = "default"; pinctrl-0 = <ð1_pins>; interrupt-parent = <&gpio>; - interrupts = <25 IRQ_TYPE_LEVEL_LOW>; + interrupts = <25 IRQ_TYPE_LEVEL_LOW>, + <24 IRQ_TYPE_EDGE_BOTH>; spi-max-frequency = <30000000>; local-mac-address = [ a0 b0 c0 d0 e0 f0 ]; };
--
2.55.0