Re: [PATCH net] net: phy: dp83867: handle the active-high LED polarity mode

Hello:

This patch was applied to netdev/net.git (main)
by Jakub Kicinski [off-list ref]:

On Thu,  3 Sep 2026 11:28:38 +0900 you wrote:

Commit a274465cc3be ("net: phy: support 'active-high' property for PHY
LEDs") added PHY_LED_ACTIVE_HIGH and made of_phy_led() set the matching
bit in the modes mask when a LED node carries the 'active-high'
property. dp83867 was not part of that series.

dp83867_led_polarity_set() only recognizes PHY_LED_ACTIVE_LOW, so
PHY_LED_ACTIVE_HIGH falls through to the default case and returns -EINVAL.
of_phy_led() propagates the error, of_phy_leds() drops the LEDs registered
so far and passes it on, and phy_probe() fails. A device tree marking a
DP83867 LED as 'active-high', which leds/common.yaml allows and
ethernet-phy.yaml references for led@N nodes, thus stops the PHY from
probing.

[...]

Here is the summary with links:
  - [net] net: phy: dp83867: handle the active-high LED polarity mode
    https://git.kernel.org/netdev/net/c/36a45facedd5

You are awesome, thank you!
-- 
Deet-doot-dot, I am a bot.
https://korg.docs.kernel.org/patchwork/pwbot.html